Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Alan 99]

Any Problems installing, I heard that the pipe will rub the brake pedal.

[Midnight Rider]

Any Problems installing, I heard that the pipe will rub the brake pedal.

On my 06 SEUC, had no problems at all.  Use the thin gaskets furnished with the pipes.

Some of the 07's had problems, and some didn't, with both RH's and V&H.  Nothing that a little Dremel work on the pedal won't take care of easily, and nobody will know but you...

[sadunbar]

Any Problems installing, I heard that the pipe will rub the brake pedal.

I installed Rinehart Tru Duals on my 07 SEUC with no clearance issues with the brake pedal.  Some have had an interference with the heat shield.  Some have modified the brake pedal and some have modified the heat shield slightly to eliminate the interference.

I don't think anyone definitively pinpointed the cause the occasional interference - variation in the bikes or variation in the pipes.  I don't think anyone did not overcome the problem with some slight modification or adjustment.

Scott

[Black Diamond]

Alan 99

Installed them on my 08 SERK. No problems. Glad to have the RH sound back
Haven't taken the time to update photo. Will soon.

[miker]

No issue with 2-1, just used thin gaskets.

Miker

[RGL]

No issue with RH TD's on '07 SERK. The right pipe is close to the brake pedal but doesn't touch, even when it heats up. They come with an adaptor to kick the right floorboard out a bit, which also solves that fitment issue. Go RH and never look back.

[Alan 99]

Thanks for all your help i was going with the BUB 7, But i just ordered the Rinehart's with the SE K&N cone filter and the SERT.                                 Thanks Again

[SE08RK]

Alan 99

Installed them on my 08 SERK. No problems. Glad to have the RH sound back
Haven't taken the time to update photo. Will soon.

This HD dealer where I bought the bike said that the RH TD's would not fit the '08 SERK. Wonder why they would tell me that when you have done it? Did you have to use the DS 1861-0373 front header shield to clear the brake pedal? And I understand that the RH number is 1800-0434, correct? I'll buy a set and the heat shield and install them myself....

[Alan 99]

No.  Didn't have any problems, just buy the one that fits the 07-08, they send spacers for your right side foot rest.   Just having problems with the air filter because K&N doesn't make a replacement filter yet and if you go with the SE stage one kit you have to buy a back cover and that part number is 29121-07.

[SE08RK]

No.  Didn't have any problems, just buy the one that fits the 07-08, they send spacers for your right side foot rest.   Just having problems with the air filter because K&N doesn't make a replacement filter yet and if you go with the SE stage one kit you have to buy a back cover and that part number is 29121-07.

So you had no issues with the brake pedal and/or forward heat shield? That's the reason that I'm given for the pipes not fitting....

Thanks

[Midnight Rider]

No.  Didn't have any problems, just buy the one that fits the 07-08, they send spacers for your right side foot rest.   Just having problems with the air filter because K&N doesn't make a replacement filter yet and if you go with the SE stage one kit you have to buy a back cover and that part number is 29121-07.

Do a search here for "Roll Your Own Air Filter"...you will get all the part numbers for the high flow A/F and save money in the process.  You will also get rid of the plastic air box on the bike and replace it with the chrome backplate.

[DoCPooF]

I didn't have any issues with mine.

Like others have said, there is a spacer for the right side (foot brake/floor board).



I changed the caps to EPC.

[kojak]

Any Problems installing, I heard that the pipe will rub the brake pedal.

I had to crimp the heatshield a tiny bit and it was fine. Not noticeable at all.