www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Question for tuners  (Read 1000 times)

0 Members and 1 Guest are viewing this topic.

Deacon

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 88
Question for tuners
« on: January 09, 2008, 02:05:23 PM »
I have a FXD with the 110 SE kit. I am running with V&H straight shots with the quiet baffles.
I would like to switch back and forth from my stock 2007 FXD (96 cu in) pipes and the V& H.
I am not worried about performance hits just whether or not the rich condition that will be generated will cause any damage to my mill.
My dealer won't give me my SERT map (bike is dialed in so nice), so it would be fruitless to have it tuned with the quiet stock pipes every time I wanted to swap them.
Any feedback?

Logged

Boatman

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 4816
  • FLHRSEI.ORG

    • CVO1: 2014 CVO Limited
    • CVO2: 2010 SEUC-accident victim-gone
    • CVO3: 2005 SEEG-traded on 2010
Re: Question for tuners
« Reply #1 on: January 09, 2008, 02:11:21 PM »
Quote from: Deacon on January 09, 2008, 02:05:23 PM

My dealer won't give me my SERT map (bike is dialed in so nice),



I think you would be ok to run the same SERT map with either set of pipes and be just fine..  If it was a little rich, way better than too lean.

The SERT is yours and you paid for it, I can't believe some dealers.  I took them in a Zip (or whatever the correct name is) and the tech gave me my map and I went home and put it on my home computer, tweaked in a few areas, and downloaded to my bike.  Seems like some dealers thinks it's theirs.  They just want you to keep coming back for more dinero.
Logged

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5476
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: Question for tuners
« Reply #2 on: January 10, 2008, 11:22:10 AM »
Not only that but chit can happen to ECMs.  When my 110 dropped its valve guide and quit running the tech at the out-of-town shop said that initially HD tech support thought I had an ecm problem and told him to re-load the map.  He did so (stock 110 map ? ? ?) not knowing I had a SERT map in it.  If he'd gotten it running I couldn't have ridden it home with that stock map in it.  From now on I'll be sure to carry the dongle and the sert map file with me - just in case.
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

rednectum

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 834
Re: Question for tuners
« Reply #3 on: January 19, 2008, 07:08:31 AM »
deacon, after the performance mods you have done, installing the stock exhaust will make it ping like crazy---with heat backing up into the heads.
Logged
 

Page created in 0.218 seconds with 21 queries.