Topic: SERK3 Headlight Question (Read 5727 times)

BigLew · « **Reply #30 on:** April 25, 2008, 10:36:45 AM »

Cool, so whats the cost, how hard to do and how is the improvement? Where do I buy the parts/kit?

naitram · « **Reply #31 on:** April 25, 2008, 10:44:21 AM »

see pic below for comparison, i have an older SERK so i went from the single H4 to the dual halogen and then to dual HID

parts can be purchased from hd-dude. not too dificult to install if you are comfortable removing your nacelle.

the wiring is easy enough unplug your halogen bulbs and remove them plug in HID module to existing plugs on bike and pluging HID bulbs to the modules. the most difficult part on a road king is finding room for the modules, you should be able to uses godd double sided tape and stick one on each side on the front facing portion of the nacell where its flat ( in front of the fork tubes ) i have mine duct'd to the fork tubes

Author Topic: SERK3 Headlight Question (Read 5727 times)

BigLew

Re: SERK3 Headlight Question

naitram

Re: SERK3 Headlight Question