Topic: primary oil (Read 890 times)

badfx · « **on:** June 13, 2005, 01:37:17 PM »

Quick ?
How much oil goes in the primary is it 20 oz?

Coolbreeze · « **Reply #1 on:** June 13, 2005, 02:05:44 PM »

Due to the high quality education I rec'd at this site and some advise from motorcops that I ride with, I poured the whole quart in there, and it does just fine! My stealership told me I was a fool, but these are the same guys that told my crankcase couldn't be seeping oil, because it's a dry sump....

hd-dude · « **Reply #2 on:** June 13, 2005, 04:17:35 PM »

If you do it "by the book" it should be at the bottom of the clutch spring.

shovelhead71 · « **Reply #3 on:** June 13, 2005, 04:20:07 PM »

bottom of clutch spring - and you can seach for the data sheet later on this site - I posted it a few weeks ago ------

mr_magoo · « **Reply #4 on:** June 13, 2005, 04:41:32 PM »

Usually just over a quart.

Fatboy · « **Reply #5 on:** June 13, 2005, 09:31:04 PM »

For what its worth the 2005 SEEG2 owners manual says capacity is 32 ounces.........

HUBBARD · « **Reply #6 on:** June 13, 2005, 10:18:33 PM »

Quote

Quick ?
How much oil goes in the primary is it 20 oz?

Yeah, 'er 'uh, badfx,
Refer to General CVO Discussion, Topic: Primary Fluid Level, Started by Coolbreeze on May 31, 2005. There endeth the lesson. Later--HUBBARD

Author Topic: primary oil (Read 890 times)

badfx

primary oil

Coolbreeze

Re: primary oil

hd-dude

Re: primary oil

shovelhead71

Re: primary oil

mr_magoo

Re: primary oil

Fatboy

Re: primary oil

HUBBARD

Re: primary oil