www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Auto Compression Release setting for '09 CVO  (Read 1052 times)

0 Members and 1 Guest are viewing this topic.

Loud Couch Rider

  • Newbie
  • *
  • Offline Offline
  • Posts: 27

    • CVO1: 09 SEUC Silver/Blue
Auto Compression Release setting for '09 CVO
« on: December 11, 2008, 05:04:01 PM »
I recently remapped my '09 SEUC after installing a new SE A/C and Rinehart's Eagle Beak slip-on mufflers.  The default setting in the 'stock' map under the tuning setup tab for the auto compression release (ACR) is "ACR Disabled".  Does anyone know if it should be set to "ACR Enabled" after tuning?   Or is the ACR Disabled the correct setting to run with.
Logged
2009 CVO Ultra - SE A/C, Stock mufflers w/Fullsac 2", V&H Pw Duals, S.E. 4.0 10.5:1 Pistons, Head work by Rivas V-Twin, Cometic .030, Red Shift 657S Cams.  Dyno 120.7 HP, 125.6 TQ


The hardest part about doing nothing is knowing when you're through!

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5477
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: Auto Compression Release setting for '09 CVO
« Reply #1 on: December 11, 2008, 05:34:32 PM »
Ummm, I think you would want them enabled in order for them to function.  Disabled is like not having them at all.
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

Loud Couch Rider

  • Newbie
  • *
  • Offline Offline
  • Posts: 27

    • CVO1: 09 SEUC Silver/Blue
Re: Auto Compression Release setting for '09 CVO
« Reply #2 on: December 11, 2008, 07:31:05 PM »
Yes, I agree, that is the obvious answer but is it the right answer?  I have read hundreds of posts here about remapping the ECM but never have I read a word of caution to make sure and set the ACR to enable.  I do not understand why HD would have the default setting set to disable. 

Just a newbie looking for a little help...
Logged
2009 CVO Ultra - SE A/C, Stock mufflers w/Fullsac 2", V&H Pw Duals, S.E. 4.0 10.5:1 Pistons, Head work by Rivas V-Twin, Cometic .030, Red Shift 657S Cams.  Dyno 120.7 HP, 125.6 TQ


The hardest part about doing nothing is knowing when you're through!

Unbalanced

  • FUD Examiner
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6710

    • CVO1: 2011 SESG,
    • CVO2: 2004 SEEG Pumpkin,
    • CVO3: 2002 Police Roadking, Maudie and Maybelle Slayer
Re: Auto Compression Release setting for '09 CVO
« Reply #3 on: December 11, 2008, 08:49:16 PM »
definitely want this enabled otherwise you may find too much kick back on your starter.
Logged
HBRR Florida Chapter,  STILL - The Fastest Chapter - Proven yet again Bikeweek 2017

BLM777

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2187
  • Who says 110's won't run? SofA 777

    • CVO1: FXSTSSE3 Black Diamond/Emerald Ice
Re: Auto Compression Release setting for '09 CVO
« Reply #4 on: December 12, 2008, 09:25:29 AM »
I've seen several stock maps prior to tuning and the default setting for the ACR's was always "enabled".  Don't know why yours wasn't, but do know that you want it on.
Logged

Loud Couch Rider

  • Newbie
  • *
  • Offline Offline
  • Posts: 27

    • CVO1: 09 SEUC Silver/Blue
Re: Auto Compression Release setting for '09 CVO
« Reply #5 on: December 12, 2008, 02:22:27 PM »
I've seen several stock maps prior to tuning and the default setting for the ACR's was always "enabled".  Don't know why yours wasn't, but do know that you want it on.

Thanks for the input - I am off to the shop to remap the ECM! 

If anyone has purchaced the HD Super Tuner Instructional DVD I would be interested in hearing from them... P/N 32101-08   just to know if the DVD is worth having in the 'toolbox'
Logged
2009 CVO Ultra - SE A/C, Stock mufflers w/Fullsac 2", V&H Pw Duals, S.E. 4.0 10.5:1 Pistons, Head work by Rivas V-Twin, Cometic .030, Red Shift 657S Cams.  Dyno 120.7 HP, 125.6 TQ


The hardest part about doing nothing is knowing when you're through!
 

Page created in 0.215 seconds with 21 queries.