Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Dan_Lockwood]

I'm in the need of making a 1/8" spacer to correct my offset on the new bike project.  I have shimmed the rear sprocket the 1/8" and it lines up great.  So I need to waterjet a new stainless pentagon shaped 1/8" thick spacer rather than using the die washers I have in there for mock up.

So what is the bolt pattern?  Does someone have a print of the five bolt spacing?

Thanks.

[Dan_Lockwood]

I'm in the need of making a 1/8" spacer to correct my offset on the new bike project.  I have shimmed the rear sprocket the 1/8" and it lines up great.  So I need to waterjet a new stainless pentagon shaped 1/8" thick spacer rather than using the die washers I have in there for mock up.

So what is the bolt pattern?  Does someone have a print of the five bolt spacing?

Thanks.

Forgot to mention, this is for the "old" style 5 bolt rear 48/51 tooth sprockets and 7/16" bolts.

Hope to see an answer soon so I can get this government project started.      

[Dan_Lockwood]

I reverse engineered a sprocket in AutoCAD to get what I needed.  I was just hoping not to do that, but it all seems to be correct in the drawing.

So if anyone is searching for this, you can stop, I've got what I need now.

Thanks anyway.