www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Andrews 54 Cam  (Read 2061 times)

0 Members and 1 Guest are viewing this topic.

DavidG

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 239

    • CVO1: 2011 FLHXSE2
    • CVO2: 2007 FLHRSE3 **Sold**
    • CVO3: 2007 FXSTSSE **sold**
Andrews 54 Cam
« on: January 29, 2009, 07:49:25 PM »
I have an 07 SE RK and would like to change the cam from the stock SE255 to something with a bit more mid-range. The engine is basically stock with the Heavy Breather, VH Big Shots, SERT. When I had the 0906 Update, I had the heads ported/polished and milled 0.020". I checked with Andrews and they suggested the 54, which was new for 08. Has anyone tried this cam and like to provide feedback ? The dealer locally has been pushing the SE251 or the Andrews 55. Thanks
Logged
2011 FLHXSE2

OILCAN1

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 172
Re: Andrews 54 Cam
« Reply #1 on: January 29, 2009, 08:23:57 PM »
Haven't seen much on that one but there are many posts here about the 251 cams and most seem to be happy with them. I just had a set installed on my 07 ultra when it was in for the upgrade. I have not had a chance to try them out yet due to the sub zero weather and snow we have had here. As soon as I get a chance to go for a ride I will certainly be posting my thoughts.
Logged

gremlush

  • I may not be good, BUT, I am slow.
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 167
Re: Andrews 54 Cam
« Reply #2 on: January 29, 2009, 10:01:41 PM »
Andrews 32H { .570 lift } would be better, but what would I know ? Dewey 
Logged

dsmbagger

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
Re: Andrews 54 Cam
« Reply #3 on: January 29, 2009, 11:08:19 PM »
Quote from: gremlush on January 29, 2009, 10:01:41 PM
Andrews 32H { .570 lift } would be better, but what would I know ? Dewey 

Dewey, glad to see you posting up again, hope all is well...i miss the 3 amigo's from VTF!!!Doc, GRoc and you! You ever hear from GRock or is he busy building space shuttles now? lol
Logged

gremlush

  • I may not be good, BUT, I am slow.
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 167
Re: Andrews 54 Cam
« Reply #4 on: January 30, 2009, 08:52:40 AM »
Grock has been busy with his NEW job - canning 'sewer pickels'.
Logged

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Andrews 54 Cam
« Reply #5 on: January 30, 2009, 01:56:39 PM »
103 kit on a 09 ultra with the 54 cam
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com

hoggr

  • Newbie
  • *
  • Offline Offline
  • Posts: 3

    • CVO1: FLHTCUSE2
Re: Andrews 54 Cam
« Reply #6 on: February 03, 2009, 08:03:49 PM »
David,
Go Andrews 54, installed in my '07 ultra eagle last fall, 109 hsp, 120 tq, 9.8 comp., engine temp in low 200's....couldnt be happier!
Logged

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
Re: Andrews 54 Cam
« Reply #7 on: February 04, 2009, 06:01:40 PM »
Quote from: hoggr on February 03, 2009, 08:03:49 PM
David,
Go Andrews 54, installed in my '07 ultra eagle last fall, 109 hsp, 120 tq, 9.8 comp., engine temp in low 200's....couldnt be happier!

Hoggr,

Very nice numbers. A dyno chart would be helpful to see the power curve.  Could you share the rest of your build details to include pistons, headwork, TB, exhaust, and tuning device?

Thanks
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

GMR-PERFORMANCE

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1769
    • TX

Re: Andrews 54 Cam
« Reply #8 on: February 11, 2009, 10:36:14 AM »
Here is the woods 408-44 cam in a CV0 110. However the heads where not the stockers. Set of stock HD heads cnc ported. I have another bike does have the stock heads with some porting and decking hope to dyno that bike here in house soon. Well when the snow melts  LOL
Logged
2012 SHARK  S&S 124 150/140   www.gmrperformance.com
 

Page created in 0.216 seconds with 21 queries.