www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: ISOLATED DRIVE  (Read 1365 times)

0 Members and 1 Guest are viewing this topic.

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
ISOLATED DRIVE
« on: April 03, 2009, 11:57:58 AM »
I tried to do a search on this but could not find the answer. Does anyone know if you can take a isolated drive sprocket off a 2008 Ultra and bolt it on a 2007 SEUC? Are there any modifications?
Logged

Dragon42

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 110
    • MO


    • CVO1: 2015 FLHXSE
Re: ISOLATED DRIVE
« Reply #1 on: April 03, 2009, 12:11:52 PM »
It will fit a 2007, but it depends on your wheels.  It is listed in the HD catalog on pg 426
Logged

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
Re: ISOLATED DRIVE
« Reply #2 on: April 03, 2009, 12:25:25 PM »
Quote from: Dragon42 on April 03, 2009, 12:11:52 PM
It will fit a 2007, but it depends on your wheels.  It is listed in the HD catalog on pg 426
[/quote
Yes, I see the part in the catalog but I wonder if there are any differences between the 2008 and 2007. I can buy a take off from an 08. Just wondering if it will bolt up without any problems.
Logged

Grizzly

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3010
    • ON


    • CVO1: '05 Jalapeno 1 of 692 sold
    • CVO2: '08 Duracell #601 of 1,800
Re: ISOLATED DRIVE
« Reply #3 on: April 03, 2009, 01:06:13 PM »
Yes you can...

I have a number of friends who have done this and are very satisfied with the results.

In fact one of my friends with an '07 SEUC was so annoyed with the sound of his bike (similar to what another member on this site was complaining about recently) that he was about to trade it in!

Thankfully he found the answer by installing the IDS (Isolated Drive System) found on '08 and newer bikes.

My friend's '07 has been customized with a fiberglass trunk painted to match and it looks great!  It would have been a real shame had he went ahead and traded it in, especially when he loves everything about it and now enjoys riding it again. 
Logged
ALL 10 Provinces & ALL Lower 48 States ridden on "MY" bike

              NW Territories and Alaska, here I come!

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: ISOLATED DRIVE
« Reply #4 on: April 03, 2009, 01:52:32 PM »

The '08 Isolated Drive is a direct fit for the '07, but if I remember correctly the '09 was redesigned and will not directly retrofit to the '07/'08.

Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

djkak

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1278
  • FLHRSEI.ORG
Re: ISOLATED DRIVE
« Reply #5 on: April 03, 2009, 02:09:32 PM »
Quote from: grc on April 03, 2009, 01:52:32 PM
The '08 Isolated Drive is a direct fit for the '07, but if I remember correctly the '09 was redesigned and will not directly retrofit to the '07/'08.

Jerry

The drive is integrated with the wheel hub in '09.
Logged

dartman

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 940
Re: ISOLATED DRIVE
« Reply #6 on: April 03, 2009, 05:13:36 PM »
Quote from: harleyguynv on April 03, 2009, 11:57:58 AM
I tried to do a search on this but could not find the answer. Does anyone know if you can take a isolated drive sprocket off a 2008 Ultra and bolt it on a 2007 SEUC? Are there any modifications?
Its not quite that simple, I did it, installed the IDS from an 08  trikr conversion, 08 axle is a different size then the 07 requires pressing a different bearing into the hub.
Logged

BayouBiker

  • Patriot Guard - HOG - ABATE
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2113

    • CVO1: '07 Cherry Jester 110"
    • CVO2: '99 FXDWG 96"
    • CVO3: 'BSR'
    • photos by Tiki Tom
Re: ISOLATED DRIVE
« Reply #7 on: April 03, 2009, 05:23:14 PM »
I bought the IDS from the HD P&A catalog right after it was released, installed it on my '07 SEUC myself whilst doing a rear tire change.

I love it !!     :2vrolijk_21:
Logged
Live - Love - Ride
         :-*

Guardian Angels are everywhere! When they don't have wings, I call them friends.

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
Re: ISOLATED DRIVE
« Reply #8 on: April 03, 2009, 06:50:58 PM »
Quote from: dartman on April 03, 2009, 05:13:36 PM
Its not quite that simple, I did it, installed the IDS from an 08  trikr conversion, 08 axle is a different size then the 07 requires pressing a different bearing into the hub.

I was on another site and it seems you are correct. They are also saying the
bearing is a different size and they say the spacers are also different. I was hoping it would just bold on.
Logged

golaith69

  • 06 FLHTCUSE - BLACK CANDY CRIMSON
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 219
  • PLEASE STAND UP WHEN YOU ARE TALKING 2 ME
Re: ISOLATED DRIVE
« Reply #9 on: April 03, 2009, 07:22:01 PM »
hello; all ;  yes it does go on the 07 models , depending on the wheels you have - but mite have to do a bearing change ...  the spacer does come with the IDS system when you buy it .. I  HAVE BEEN TOLD THAT THEY DO-NOT  hold up to motors over 100 HP very well the rubbers inside them start giving out , and then need to replace them , they are sold separately ..  thanks , jeff
Logged
up grades - true duals , vance & hines slash cuts , power commander , KN super sucker -w/ chrome base , smart siren II w/ pager ,chrome inner primary ,engine lites ,L.E.D tail lites ,chrome windshield molding ,oil temp guage into fairing, speaker trim rings ,radio trim piece , etc.

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
Re: ISOLATED DRIVE
« Reply #10 on: April 05, 2009, 01:39:52 PM »
Quote from: dartman on April 03, 2009, 05:13:36 PM
Its not quite that simple, I did it, installed the IDS from an 08  trikr conversion, 08 axle is a different size then the 07 requires pressing a different bearing into the hub.

Did you have to change the axle spacers or did they fit?
Logged
 

Page created in 0.231 seconds with 21 queries.