www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: S. E. 251 Cams  (Read 1175 times)

0 Members and 1 Guest are viewing this topic.

09 S/T FLTRSE3

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 95

    • CVO1: 2009 Silver/ Titanium FLTRSE3
S. E. 251 Cams
« on: April 18, 2009, 10:24:35 PM »
Hey All,

Looking for a little feedback on the S. E. 251 cams. Anybody have any experience with them in a 110" motor ?

Cheers, Ken  8)
« Last Edit: April 19, 2009, 10:52:53 AM by 09 S/T FLTRISE3 »
Logged

Iglide

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 467

    • CVO1: 2009 FLTRSE3
Re: S. E. 251 Cams
« Reply #1 on: April 18, 2009, 10:48:59 PM »
Logged
The impossible just takes a little longer

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3133
Re: S. E. 251 Cams
« Reply #2 on: April 19, 2009, 01:17:56 PM »
These are decent cams. There are better aftermarket offerings that work well in the 110.
Getting the cylinder pressure down a bit by a later intake close is desireable but expect a move of the torque line to the right, higher rpms. When the heads are milled the throat size corrected by an OS intake valve these cams would come into their sweet spot.
Logged
 

Page created in 0.218 seconds with 21 queries.