www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: TTS Base Calibration  (Read 774 times)

0 Members and 1 Guest are viewing this topic.

jfh

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 679

    • CVO1: FLTRSE3
TTS Base Calibration
« on: July 20, 2009, 06:31:56 PM »
I am looking for recommendations for a TTS MT-7 base calibration to break in my 2009 SERG3 with the following performance upgrades:

1. SE 58mm TB w/ 5.3 injectors
2. S&S 585 cams
3. Pro Street ported heads set for 10:1 CR
4. Cat-free head pipes with Fullsac 2" baffles

Full dyno tune will follow after break-in.

Thanks
Logged
Hammer - CVO Member #641

2009 FLTRSE3: Axtell jugs, JE forged flat top pistons, S&S 585 cams, SE 58mm TB, Dewey's Pro-Street porting, SE cam plate, Zipper's tapered pushrods, Cat-less, 2" Fullsac, TTS, Twin Jagg oil coolers, AK-20, 13" Works Black Trackers w/ARS, Clearview, Hawg Wired, Yaffe Monkey Bars, Danny Gray Big Seat

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2422
  • 65 FLH 93" + others
Re: TTS Base Calibration
« Reply #1 on: July 20, 2009, 08:32:31 PM »
Quote from: hdfr120 on July 20, 2009, 06:31:56 PM
I am looking for recommendations for a TTS MT-7 base calibration to break in my 2009 SERG3 with the following performance upgrades:

1. SE 58mm TB w/ 5.3 injectors
2. S&S 585 cams
3. Pro Street ported heads set for 10:1 CR
4. Cat-free head pipes with Fullsac 2" baffles

Full dyno tune will follow after break-in.

Thanks

You might want to check the calibration files and find the one with your setup.
I think I would richen up the bias tables, and set the MAP20 to about 13.8 AFR or so for break in.

Check here: Calibration File Listing, Revision 2009C in your Master Tune Program

Logged
HOGMIKE
 

Page created in 0.248 seconds with 21 queries.