Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[charles05663]

Is there anyway to view the backup ECM MTE file?  I would like to look at the original file that HD produced to compare it to the Fullsac one.

[Herko]

MTE files are not viewable.
Flash-able but not viewable.

[CVOStreetglide]

MTE files are not viewable.
Flash-able but not viewable.

I thought Steve posted that they were in the Master Tune software.... i/e you can view, save and change them and then go back to the factory origional maps if need be.  Am I wrong too

Regards

[charles05663]

You can view and edit the MT6 & MT7 files.  I tried to rename the MTE file to a MT7 file and no luck.  I was hoping to load the file and check the factory settings for the AFR, etc.

[LarryB]

just leave those alone, good thing you can't open them. might do some damage.
stock or base map is just the beginning. you need to V-tune to get the optimum from Mastertune

[CVOStreetglide]

just leave those alone, good thing you can't open them. might do some damage.
stock or base map is just the beginning. you need to V-tune to get the optimum from Mastertune

So Larry the Master Tune won't let you "view" and save the factory loaded map either. Am I right or wrong???

I am sitting here with a box full of the newest SSERT stuff unopened trying to decide (for me) what the better approach is to my small tuning needs.

Most here think Master Tune and some swear by the new SSERT with data logger. Have any of you professional guys actually tried the new SSERT with the data logger besides Steve?? If so what are your thoughts if they haven't been expressed in the earlier posts and discussions.

Regards

[Herko]

I thought Steve posted that they were in the Master Tune software.... i/e you can view, save and change them and then go back to the factory origional maps if need be.  Am I wrong too

Regards

The base "tuning" cals are part of the TTS software but not the MoCo factory cals.
Base tuning cals are of course viewable.
You can extract your MoCo factory cal from your ECM, it's suffixed as an MTE file.
MTE files are not viewable.

I am sitting here with a box full of the newest SSERT stuff unopened trying to decide (for me) what the better approach is to my small tuning needs.

FWIW, several guys I have tuned for with a TTS wish they would have not have first spent their money on the SEPST.
Return yours while you can (unopened).

[CVOStreetglide]

The base "tuning" cals are part of the TTS software but not the MoCo factory cals.
Base tuning cals are of course viewable.
You can extract your MoCo factory cal from your ECM, it's suffixed as an MTE file.
MTE files are not viewable.

FWIW, several guys I have tuned for with a TTS wish they would have not have first spent their money on the SEPST.
Return yours while you can (unopened).

Thats why I am asking... The guys who do this for a living have opinions on what works and what doesn't work and I for one am listening.

I am really interested in any recent experience with the 2010 bikes, the new bungs, and the data logger hooked up to the SSERT.

I was hoping for some responses that could objectively say that it is a "newer product that is faster, better and more accurate" than the competition and the earlier SERT Product.

Also, I was told (rumor control) that there is a very new release of the product. My HD Bar Code sticker is 8/09 for the SSERT. Maybe some of the gaps/holes have been filled.

Regards   

[Steve Cole]

If you have the 2010 product release of the SESPT there have been no updates released as of this morning. While I expect that there will be to fix some of the issues they are not there yet.

[CVOStreetglide]

If you have the 2010 product release of the SESPT there have been no updates released as of this morning. While I expect that there will be to fix some of the issues they are not there yet.

Thanks Steve!!! The new numbers I received are as listed:  I'll have to check to see if my source knows of any adds/changes/deletes.  

NO I haven't broken the seal on these items yet. I'm still reading your stuff..  

The SE Pro Super Tuner Software CD   Part Number 32111-10   Dated 8/21/09
Fits '02-Later EFI touring Trike Models & '01-Later EFI Softail, Dyna, XL & VR Models (including VRXSE)

SE PRO Super Tuner  Part Number 32109-08A  Dated 05/04/09
Fits '02+ Later EFI Touring Models and '01 + Later EFI Softail, Dyna, XL, and VR Models

Super Tuner DVD Training Disk  Part Number  32101-10  Dated 06/26/09

Cable Kit SE PRO Super Tuner
For use with Screamin' Eagle Super Tuner


The "Official" HD Disclaimer:

-P+A59253

CAUTION

Harley-Davidson Motorcycles equipped with some Screamin' Eagle Performance products may not be used on public roads, and may be restricted to closed course competition use. This product is not legal for sale or use in California on pollution controlled vehicles. Screamin' Eagle Performance products are intended for the experiencedrider only.

THIS PRODUCT IS INTENDED FOR RACE APPLICATIONS ONLY

WARRANTY IMPLICATIONS

Installation of this product (and similar products from other manufacturers) may reduce or void your Harley-Davidson vehicle warranty.

[jcolesdad]

just leave those alone, good thing you can't open them. might do some damage.
stock or base map is just the beginning. you need to V-tune to get the optimum from Mastertune

Larry, I have installed 2" fullsacs and TTS Mastertune, completely removed the cat, and I'm running the stock SERG a/c. I installed the map provided by Steve at Fullsac. Do you think I could benefit by setting up the V-tune? The bike seems to run good, but could it be better? How hard is it to set up the V-tune?

[LarryB]

Larry, I have installed 2" fullsacs and TTS Mastertune, completely removed the cat, and I'm running the stock SERG a/c. I installed the map provided by Steve at Fullsac. Do you think I could benefit by setting up the V-tune? The bike seems to run good, but could it be better? How hard is it to set up the V-tune?

yes, by all means do the V-Tune, that's the real beauty of the product. it tunes to your specific bike and how YOU ride. easy to set up. best advice I can give you is DO NOT turn the bike off when you finish until after you Stop the program. read the Help files

[jcolesdad]

Thanks Larry. I'm gonna give it a shot and see how it turns out.
Thanks again.