Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Puzzled]

Looks like a Deutsch connector.

They only have 6 pin in rectangle and circle, no flat (in my catalog).

[WFP]

I read somewhere else that Bushtec sells the male/trailer end for $11.

[Bubba]

Can't you find a 4 wire flat plug that will plug into the six with out using the two HOT wires that way you will have stop and turn lights... ect?

You might find something at e-trailer they have a lot of connectors that you can make a coupler between the two.
I have never seen a 6 wire other than on a bike connector as I recall. ?? sorry but hope this helps.

http://www.etrailer.com/c-TEC.htm?Offset=0&SortBy=

[SBB]

I read somewhere else that Bushtec sells the male/trailer end for $11.

Bill

That makes the most sense!

SBB

 

[OhioDave]

I read somewhere else that Bushtec sells the male/trailer end for $11.

I can't find anything either, it looks like a homemade adapter is in order using Bushtec's male plug and a 4 pin female..

[hogasm]

Is the 6 pin flat or round?

Flat

[hogasm]

Looks like a Deutsch connector.

I believe they are called weather tight connector

[hogasm]

Bill

That makes the most sense!

SBB

 

Making sense would be calling Bushtec and asking them....so I did after trying many different wiring configurations. I could get the run/brake/ and 1 turn signal to work....never both turn signals to work.

Bushtec said to run another harness. So the bike will have a 4 & 6 plug connector at the hitch. Damn nothing is ever easy is it

[OhioDave]

Bushtec said to run another harness. So the bike will have a 4 & 6 plug connector at the hitch. Damn nothing is ever easy is it

Ouch, well at least everyone here knows who to call if we need a tow vehicle 

[Twolanerider]

So the bike will have a 4 & 6 plug connector at the hitch.

With a four plug connect coming off the bike which are you going to leave off?  The right t/s, left t/s, park light or brake light?  Since the bike isolates each of those on a separate leg you don't have enough pins on a four wire connector.  Unless you just don't ground it .

[hogasm]

With a four plug connect coming off the bike which are you going to leave off?  The right t/s, left t/s, park light or brake light?  Since the bike isolates each of those on a separate leg you don't have enough pins on a four wire connector.  Unless you just don't ground it .

Could ground it through the hitch   then maybe it will be all or nothing

[Twolanerider]

Could ground it through the hitch   then maybe it will be all or nothing

Nope.  Won't work worth a damn.

[hogasm]

Nope.  Won't work worth a damn.

Then I guess that would be the NOTHING

[Twolanerider]

They only have 6 pin in rectangle and circle, no flat (in my catalog).

Might be a Delphi Metripack type connector:

http://www.pcsconnectors.com/12059573.aspx

[WFP]

Might be a Delphi Metripack type connector:

http://www.pcsconnectors.com/12059573.aspx

Damn Don, that is good...and if you need a cavity plugged...because you only use four wires...they have this