www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: tin rattle from rear  (Read 1581 times)

0 Members and 1 Guest are viewing this topic.

marsred204

  • Alan
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: 2008 Inferno Orange FXSTSSE2
tin rattle from rear
« on: May 11, 2009, 10:54:33 PM »
I've got a rattle coming from the rear suspension. It sounds like it's on the left side. I can't find anything loose. The dealer swears that it's the axle cover hitting the muffler. They're not even on the correct side. They want to replace both parts (warranty). There is no way this is the problem. It's a rattle not a scraping sound. Is it possible that the belt is hitting one of the belt guards? I.m new here so any info will be helpfull

                                           Alan
Logged
I'm like a rusted steel trap: I look dangerous, I just don't do much

metalgrind

  • METALGRIND
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 154
  • 2008 FXSTSSE2 Inferno Orange,

    • CVO1: 2008 FXSTSSE2, V&H Big Radius, SERT, HD Oil Cooler
Re: tin rattle from rear
« Reply #1 on: May 12, 2009, 10:21:29 AM »
Have you checked on the play in the drive belt. To much play may cause it to hit against the belt guard when you let off the throttle.
Logged

ice6900

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3268

    • CVO1: fxstsse 07
    • CVO2: (non cvo) fxdl customised
    • CVO3: (custom)arlen ness 1914 flat trak replica
Re: tin rattle from rear
« Reply #2 on: May 12, 2009, 01:41:56 PM »
is it possible that the belt is hitting one of the belt guards?

unlikely unless u have an rubber shavings around the pulley or rear wheel¨


it not the axle nut cover loose?



Logged

marsred204

  • Alan
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: 2008 Inferno Orange FXSTSSE2
Re: tin rattle from rear
« Reply #3 on: May 13, 2009, 12:01:49 AM »
There is no rubber residue. I can tell you the sound appears more when the motor is under load.

                                      Alan
Logged
I'm like a rusted steel trap: I look dangerous, I just don't do much

the barber

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 151
Re: tin rattle from rear
« Reply #4 on: June 10, 2009, 11:01:30 PM »
Check your wheel bearings if you had your tire change. thats the noise my bike made before the rear bearing blew out.
Logged

marsred204

  • Alan
  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: 2008 Inferno Orange FXSTSSE2
Re: tin rattle from rear
« Reply #5 on: August 09, 2009, 05:55:24 PM »
After much trial and error. The problem is in the axle cover. The screws are tight but it "snaps" against the swingarm while riding at highway speeds. I havn't decided how to resolve this yet but, it should be very simple.

                                          Alan
Logged
I'm like a rusted steel trap: I look dangerous, I just don't do much

ice6900

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3268

    • CVO1: fxstsse 07
    • CVO2: (non cvo) fxdl customised
    • CVO3: (custom)arlen ness 1914 flat trak replica
Re: tin rattle from rear
« Reply #6 on: August 13, 2009, 02:35:41 PM »
Quote from: marsred204 on August 09, 2009, 05:55:24 PM
After much trial and error. The problem is in the axle cover. The screws are tight but it "snaps" against the swingarm while riding at highway speeds. I havn't decided how to resolve this yet but, it should be very simple.

                                          Alan

what did i tell you,,     a lil bit of silicon sealant should suffice
Logged
 

Page created in 0.235 seconds with 21 queries.