Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Saddlebag Latch Inserts  (Read 8312 times)

0 Members and 1 Guest are viewing this topic.

Wheelsnkeels

  • Freedom isnt free Thank a Vet!
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1300
  • Indiana Patriot Guard Riders

    • CVO1: 2010 SESG Tequila Sunrise
    • CVO2: 2007 Heritage Custom (not CVO) too much chrome
    • CVO3: 2006 Heritage Classic (overinvested in mods ?)
Re: Saddlebag Latch Inserts
« Reply #15 on: November 29, 2009, 04:09:36 PM »

I'm doing a set of inserts in Tequila sunrise for an SESG. removing the reflectors, yaaaa,
and inserting a fabbed piece painted to match. since I'm painting the TP & lower fairings it shouldn't be difficult
:worthless:
Logged
RC Components Savage  200/55/17 Rear 140/70/21 front
Corbin Dual Tour (Heated)
Street Magic LED's
TTS Mastertune
Fueling 574 Cams & Lifters
SE Adjustable pushrods
Progressive Mono Tubes
Hog Tunes Hog Pods
J&M 7.25 Speakers w/250W Amp
Kuryakyn 9182 License plate frame
Vance & Hines Power Dual's
BUB Boom Cans slip on Exhaust 
Detach Tequila King Tour Pak
Rumble passenger Floorboards
Freedom Shield 7"
Riders Claw Iphone

slamr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 518

    • CVO1: 2021 Sunset Orange / Sunset Black Fade
    • CVO2: 2010 Concord FLHXSE - Sold
Re: Saddlebag Latch Inserts
« Reply #16 on: November 29, 2009, 06:33:57 PM »

I really like the looks of the latches on the SE Ultra.  :2vrolijk_21:  Will these fit the SESG?
Logged

Fired00d

  • Global Moderator
  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 32683
  • Orange & Black SEEG... Can it get any better?
    • VA


    • CVO1: FLHTCSE
Re: Saddlebag Latch Inserts
« Reply #17 on: November 29, 2009, 06:37:51 PM »

I really like the looks of the latches on the SE Ultra.  :2vrolijk_21:  Will these fit the SESG?
Latches for hard bags should work on any bike that has hard bags. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:
Logged
:pumpkin: 2004 Screamin’ Eagle Electra Glide :pumpkin:
Rinehart True Duals
SE Breather
SE Race Tuner
HogTunes Speakers
Zippers 575 Gear Drive Cams
Zippers Pro-Tapered Adjustable Push Rods
Zippers Oil Pressure Bypass Shim
Feuling Oil Pump
Feuling Lifters
Zumo 550 W/Flame Caps
Lyndall Z+ Brake Pads
CVOHarley Member #1234
PGR Member #754 (Since '05)
Proud Member EBCM #2.0

slamr

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 518

    • CVO1: 2021 Sunset Orange / Sunset Black Fade
    • CVO2: 2010 Concord FLHXSE - Sold
Re: Saddlebag Latch Inserts
« Reply #18 on: November 29, 2009, 06:47:14 PM »

Latches for hard bags should work on any bike that has hard bags. :2vrolijk_21:

 :pumpkin:
Ride Safe,
Fired00d
 :fireman:

Thought so. . . .  Thanks for confirming!
Logged

Majorrocky

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 220

    • CVO1: 2008 FLHRSE4 / SERK
Re: Saddlebag Latch Inserts
« Reply #19 on: November 29, 2009, 07:02:02 PM »

Thought so. . . .  Thanks for confirming!

This is getting a little bit off-topic but I started the thread so I guess it's ok... :zthread:  To backup what Fired00d said... the bags I bought didn't have any hardware so I had to do a little searching and found essentially a "universal" kit.  Part #90948-00 is a complete kit of harddware for the hard bags.  See the attached pdf for the parts list.

Back to the original question of the thread... I've seen some good options here and I appreciate the input but I'm getting pretty fond of the IronGlass design... especially with that 20% discount for dragging them into this forum and exposing them to this wonderful audience of potential customers!!!   Right Ted?   :P  (I'll be calling you later this week.)
Logged

mjb765

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6809

    • CVO1: 2011 FLHXSE--sold
    • CVO2: 2015 FLHXSE--sold
    • CVO3: 2018 FLTRXSE
Re: Saddlebag Latch Inserts
« Reply #20 on: November 29, 2009, 07:10:22 PM »

This is getting a little bit off-topic but I started the thread so I guess it's ok... :zthread:  To backup what Fired00d said... the bags I bought didn't have any hardware so I had to do a little searching and found essentially a "universal" kit.  Part #90948-00 is a complete kit of harddware for the hard bags.  See the attached pdf for the parts list.

Back to the original question of the thread... I've seen some good options here and I appreciate the input but I'm getting pretty fond of the IronGlass design... especially with that 20% discount for dragging them into this forum and exposing them to this wonderful audience of potential customers!!!   Right Ted?   :P  (I'll be calling you later this week.)

Then put them on and don't forget to post pics :bananarock:
Logged

wnace

  • Newbie
  • *
  • Offline Offline
  • Posts: 26
Re: Saddlebag Latch Inserts
« Reply #21 on: November 30, 2009, 11:36:47 AM »

I'm doing a set of inserts in Tequila sunrise for an SESG. removing the reflectors, yaaaa,
and inserting a fabbed piece painted to match. since I'm painting the TP & lower fairings it shouldn't be difficult

I would like to paint my inner fairing but am having trouble finding the paint codes for the Tequila Sunrise.
Could you share them?
Thanks
Logged

spydglide

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11892
  • spyder-psychle
Re: Saddlebag Latch Inserts
« Reply #22 on: November 30, 2009, 12:32:09 PM »

http://www.ironglassdesign.com/main/page_10781_1.html

Anybody tried them or seen them in person?


yes, I've got the Ironglassdesign inserts on the huckleberry.  Mine are #4 in the slide show on his website.  They match the colbalt paint just right and I get to use the stock latches as they seem to work well.   :2vrolijk_21:  spyder
Logged
2004 FLHTCSE Cobalt 'Huckleberry'  .....94K+mi.     &  1994 FLSTN 'OleGranny' .....116K+mi.

LarryB

  • Tennessee Squire
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3656

    • CVO1: 09 FLTRSE3 The Grey Ghost
Re: Saddlebag Latch Inserts
« Reply #23 on: December 01, 2009, 08:09:08 AM »

I would like to paint my inner fairing but am having trouble finding the paint codes for the Tequila Sunrise.
Could you share them?
Thanks

:huepfenlol2: :jester: :zroflmao:
not that I wouldn't but I'd be cutting my own throat in doing so. If your painter cannot match it, then move on. PM me and I might could help a little further
Logged
Take it Easy Greasy Cuz it's a long walk home.

Did I shave my head for this?
Pages: 1 [2]  All
 

Page created in 0.221 seconds with 21 queries.