Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[CVOjunkie]

I have a friend that the local shop sold him a bunch of parts when he did not them. he went in for a noise which we found out at home later that he had a pushrod coming in contact with the pushrod tube long story short they sold him HTCC heads and pistons and then put SE 211 cams which is a very poor combo for a touring bike. Since he  always rides two up pulling a trailer for extended times I was thinking of a head quarters cam Gear drive of coarse but I cant fine and info on what the compression ration is for this set up that he has now does anybody know? Thanks 

[johnsachs]

The way that combo is now,if using SE head gaskets,will be right in the 10.75:1 ballpark.You didn't say whether the heads were cnc ported or the D-shaped non-ported HTCC ones.The 211 cams are not the best choice,although other problems exsist with chamber/piston geometry.
Easy enough to fix,and at the same time he'll be able to make decent power,especially if they're the non- ported heads.
John