Topic: SE 110 Stock compression, etc. (Read 1806 times)

2k · « **on:** November 28, 2011, 09:56:49 AM »

Would like to do a mild build on my '09 CUSE. Does anyone know for sure what the stock #'s are? I have heard:
Compression: 9.3 to 1
Throttle Body: 50mm
Cam Lift: .550
I need to know before-hand so as not to waste money, Thanks

grc · « **Reply #1 on:** November 28, 2011, 01:08:33 PM »

The info you listed is pretty accurate, 9.3:1 static compression ratio and 50mm TB, .556" valve lift. Of more importance than just the valve lift, however, is the actual cam timing. See the attachment for the SE cam specs (the SE255 is stock).

Jerry

kerb · « **Reply #2 on:** November 28, 2011, 04:27:34 PM »

Quote from: grc on November 28, 2011, 01:08:33 PM

The info you listed is pretty accurate, 9.3:1 static compression ratio and 50mm TB, .556" valve lift. Of more importance than just the valve lift, however, is the actual cam timing. See the attachment for the SE cam specs (the SE255 is stock).

Jerry

One of the best posts ever.

Is there any spec sheet for the heads?

2k · « **Reply #3 on:** November 30, 2011, 07:41:17 PM »

Thanks Jerry, Gives me a good idea of where to start. U D Man

Author Topic: SE 110 Stock compression, etc. (Read 1806 times)

2k

SE 110 Stock compression, etc.

grc

Re: SE 110 Stock compression, etc.

kerb

Re: SE 110 Stock compression, etc.

2k

Re: SE 110 Stock compression, etc.