Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Best AFR for WOT  (Read 1588 times)

0 Members and 1 Guest are viewing this topic.

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
Best AFR for WOT
« on: January 27, 2010, 09:18:11 AM »

 First, At what AFR do most 110's make the highest numbers for WOT?  Second, input on where to set the AFR's for the rest of the map. I am curious what the differences there are between tuners.
Logged

Highjagger

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2523
  • tradition`s not worship ash but pass on the fire

    • CVO1: FXSE Breakout Pro Street 2016 ,- and 2011 Crossbones FLSTSB ,- and 2016 LowRider s FXDLs
Re: Best AFR for WOT
« Reply #1 on: January 27, 2010, 11:02:38 AM »

What do you mean with "WOT" ?
 Mine is running around AFR 13 then dyno-runs and smart settings by Supertuner HD .
Logged
Success is to stand up one more than to fall down

harleyguynv

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 140

    • CVO1: 2007 SEUC Red & Black
Re: Best AFR for WOT
« Reply #2 on: January 27, 2010, 11:08:45 AM »

What do you mean with "WOT" ?
 Mine is running around AFR 13 then dyno-runs and smart settings by Supertuner HD .

Wide open throttle, I have mine set at 13.2.
Logged

bob2002

  • Retired
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 169
  • FLHRSEI.ORG
Re: Best AFR for WOT
« Reply #3 on: February 04, 2010, 08:57:22 AM »

My 103 is at 13.0 with adjusting for the O2 sensor voltage just below 12.9,I would think you have to go with what it shows your motor needs on the dyno,at least thats what I saw when tuning mine.I can't see how you can just pick a number.
Logged
2012 Ultra Limited,V&H VO2 Intake,Wood 222 Cams,Cobra Power Port Header,CVO Mufflers,TTS Tuner
AMSOIL DEALER SINCE 1985

HOGMIKE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2356
  • 65 FLH 93" + others
Re: Best AFR for WOT
« Reply #4 on: February 04, 2010, 09:35:07 AM »

My 103 is at 13.0 with adjusting for the O2 sensor voltage just below 12.9,I would think you have to go with what it shows your motor needs on the dyno,at least thats what I saw when tuning mine.I can't see how you can just pick a number.

 :2vrolijk_21:

I looked at my '09 table, and my '10 table and it varies from 12.65 to 13 at WOT depending on load and RPM.
BUT, this is MY bike, and may not work for other combos, On the '10 it was a result of dyno tuning, and the maps were very similar to the "canned" map I got from Fullsac for the '09.
 8)
Logged
HOGMIKE
 

Page created in 0.127 seconds with 25 queries.