Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 95" factory cams  (Read 1430 times)

0 Members and 1 Guest are viewing this topic.

darreldanger

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
95" factory cams
« on: February 25, 2010, 10:59:32 PM »

Hey guys, I just bought a 2004 SE Deuce with a 95" Screamin Eagle engine, what cams did it come from the factory with? Thanks...
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: 95" factory cams
« Reply #1 on: February 25, 2010, 11:06:05 PM »

Stock 88" cams IIRC
Logged

Harleyrider_49

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 245

    • CVO1: 2004 FXSTDSE2
Re: 95" factory cams
« Reply #2 on: February 27, 2010, 11:20:03 AM »

Hey guys, I just bought a 2004 SE Deuce with a 95" Screamin Eagle engine, what cams did it come from the factory with? Thanks...

Have the same scoot....has the 95" 1550 Stage II kit,SE 203 cams,heads are the stock 88's,I think...C/R should be about 9.6,I believe....have only had this bike on the "Dyno-Drags" that go's around to dealers...if it's close.....put'n about low-mid 90's HP & TQ....don't have a "tuner" yet, and really need to change my pipes,and think it'll do a little better......lot's of great engine-mod guys here though,if ya wanna make any mods, they're the guys ta ask... :coolblue:
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: 95" factory cams
« Reply #3 on: February 27, 2010, 11:28:37 AM »

That's the kit and this is OEM from the factory 95". I would have to get into the CVO parts book to be sure but IIRC the SE bikes came with a stock cam. The add-on kit another story.
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50554
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 95" factory cams
« Reply #4 on: February 27, 2010, 11:45:30 AM »

That's the kit and this is OEM from the factory 95". I would have to get into the CVO parts book to be sure but IIRC the SE bikes came with a stock cam. The add-on kit another story.

The factory 95" motors got the SE203s.  I can go out and grab the parts manual for a citation should anyone want it. 
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50554
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: 95" factory cams
« Reply #5 on: February 27, 2010, 11:50:37 AM »

The factory 95" motors got the SE203s.  I can go out and grab the parts manual for a citation should anyone want it. 

Grabbed it anyway.  From the 2000 FLTRSEI parts manual.  Cams are 25937-99A.  That's now a  B  revision.  But that's the 203 cams.  Heads are 16716-99 and 16717-99.

Same numbers from the 2002 95" motor in the SERKs also.
Logged

HD Street Performance

  • Vendor
  • 2.5K CVO Member
  • *
  • Offline Offline
  • Posts: 3124
Re: 95" factory cams
« Reply #6 on: February 27, 2010, 12:06:17 PM »

Thanks for the clarification
Logged

darreldanger

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Re: 95" factory cams
« Reply #7 on: February 27, 2010, 08:29:16 PM »

Thanks Guys
Logged
 

Page created in 0.217 seconds with 21 queries.