Topic: HK Advance CD player error (Read 639 times)

Darty411 · « **on:** January 27, 2011, 10:34:11 PM »

I have a 2004 screamin' eagle electra glide but installed a 2008 HK advance cd player. Was building my bike so I never tried the the CD player. Now about 4 months later I have finished the bike and when I put a cd in it ejects it and says error 1...Sometimes stays in and says error 37 before ejecting. It will not play a cd. I can install a cd and lightly tap the face and sometimes it will start to play...Any ideas?

Cvostu · « **Reply #1 on:** January 28, 2011, 02:25:13 AM »

You might want to check with the dealer and see if it needs to be reprogrammed.

Iron Cross Audio · « **Reply #2 on:** January 28, 2011, 07:47:09 AM »

Reprogramming will not fix the defect. Error 37 is a no-start code. Basically, the drive is not getting a start signal. This could either be a defective drive, or a defective CD circuit in the radio.

Cvostu · « **Reply #3 on:** January 29, 2011, 11:52:41 AM »

Better call the guys at Iron Cross. They have a great reputation on here too. Fast turn around time too.

Author Topic: HK Advance CD player error (Read 639 times)

Darty411

HK Advance CD player error

Cvostu

Re: HK Advance CD player error

Iron Cross Audio

Re: HK Advance CD player error

Cvostu

Re: HK Advance CD player error