Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: installed custom dynamics regulator...still have issues with LEDs  (Read 1453 times)

0 Members and 1 Guest are viewing this topic.

Rio

  • 2011 CVO Road Glide Ultra Rio Ember/Black
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1335
  • Nick

I installed the Custom Dynamics regulator for LED turn signals.  It slowed down the rapid blinking, but the turn signal arrows are a solid illumination and don't blink like their supposed to?  Anyone else have this issue?  I have the 1157 & 1156 LED bulbs as turn signal lights that i bought from superbrightled.com  I also used them on my last scoot too, i just dealt with the fast blink and solid light.  I bought the regulator because i wanted it to work right?  Thoughts????
Logged
Full Sac X-Pipe,
Full Sac 2.25 cores
TTS Mastertune
Progressive Monotubes
Progressive 94 Shocks
Andrews 30t sprocket
Wind Splitter Windscreen
_____________________

Deep Blue Dives

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 378

    • CVO1: "Cali" - 2012 CVO Streetglide
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #1 on: July 18, 2012, 09:55:07 AM »

Is it possible that the load equalizer is not matched to your lights, or that the equalizer is bad?

Have you tried taking the load balancer out of the loop and see if the lights flash (albeit too fast)?

I purchased the front turn signal LED White Ring / Amber changing turn signal lights for my SESG from Custom Dynamics, and used their recommended balancer and have not had a problem.
Logged
"All you touch and all you see is all your life will ever be" ~Pink Floyd
"Counting all the assholes in the room...I'm definitely not alone" ~Volbeat

Rio

  • 2011 CVO Road Glide Ultra Rio Ember/Black
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1335
  • Nick
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #2 on: July 18, 2012, 02:14:18 PM »

they blink quickly with it out of the circuit. it has the correct tempo with the unit, but the arrows on the dash stay lit all the time?
Logged
Full Sac X-Pipe,
Full Sac 2.25 cores
TTS Mastertune
Progressive Monotubes
Progressive 94 Shocks
Andrews 30t sprocket
Wind Splitter Windscreen
_____________________

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #3 on: July 19, 2012, 10:04:14 PM »

Have a buddy with LED system that works? Borrow first his module and then his bulbs if the same problem exists. Also if you go to a major bike event that Custom Dynamics is at just go by and tell Dave your problem, He WILL fix it. One of the other is bad, probably the module but then you have inserts that area  different brand, which should not make a difference but stranger things have happened.
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #4 on: July 19, 2012, 10:40:45 PM »

If it happened before and is happening now, I'd say it something about that particular brand of LED signals.  I have Custom Dynamics Ringz (white outer ring w/amber turn signal on front of bike) and their regular LED ambers for the rear, along with their LED tailight.  Load equalizer and brake light pulser (10 different settings).  I have no issues whatsoever.
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

skboy

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 58

    • CVO1: 2011 Street Glide
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #5 on: July 20, 2012, 12:04:40 AM »

Try resetting the system, turn your key on, pull the big orange fuse. Leave for 10 mins and try it again. I had to do that with badlands product. Went from badlands module to stock back to badlands and i was having the same issue. A reset cured everything.
Logged
Some people go to church on sundays, I ride motorcycles.

Rio

  • 2011 CVO Road Glide Ultra Rio Ember/Black
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1335
  • Nick
Re: installed custom dynamics regulator...still have issues with LEDs
« Reply #6 on: July 20, 2012, 09:01:26 AM »

Try resetting the system, turn your key on, pull the big orange fuse. Leave for 10 mins and try it again. I had to do that with badlands product. Went from badlands module to stock back to badlands and i was having the same issue. A reset cured everything.

Good thought, i will give that a try.  everything works fine, it's just annoying that the turn signal indicators on the dash are lit and don't blink like their supposed to and turn off like their supposed to after the turn?
Logged
Full Sac X-Pipe,
Full Sac 2.25 cores
TTS Mastertune
Progressive Monotubes
Progressive 94 Shocks
Andrews 30t sprocket
Wind Splitter Windscreen
_____________________
 

Page created in 0.218 seconds with 21 queries.