Topic: I pulled the trigger on TTS... (Read 732 times)

Maladjusted · « **on:** September 08, 2010, 09:52:02 AM »

Had a good conversation with Doc around TTS and getting my bike to run right.

I pulled the trigger and ordered the TTS and Cables from Doc.

I'll start with the EUJ009-01 Map from TTS as a baseline (Stock bike with Air cleaner and race exhaust), and run VTune to see if I can get a bike that doesn't stall and have a vicious flat spot at just off idle.

Any advice from anyone that went through this learning curve would be appreciated.

I'll eventually end up taking my bike down to Doc and having a cam added and a dyno session with him.

Mal

ultrafxr · « **Reply #1 on:** September 08, 2010, 04:27:31 PM »

Pretty simple actually. Just read the manual thoroughly and follow the instructions step by step and you'll be fine.

Author Topic: I pulled the trigger on TTS... (Read 732 times)

Maladjusted

I pulled the trigger on TTS...

ultrafxr

Re: I pulled the trigger on TTS...