Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[paconico1992]

Anyone aware of an after market cruise control for 2010 CVO FLSTSE?

[VRODDAVE]

I am not aware of any aftermarket cruise controls,   but i do see that the 2011 flstse2 came with cruise control,  so im suggesting that you could retrofit the factory cruise to your bike.   I  have performed lots of factory retrofiting on my flhtcse and i have found that its really pretty easy.  somtimes costly,  but its always an adventure and a lot of personal satifaction in figuring it all out.   

[RCFlyer]

Anyone aware of an after market cruise control for 2010 CVO FLSTSE?

These guys make them for Softails. I'm not sure if they'll fit the CVO or not and I don't know anything about them. It looks like the link to the cruise kit is broken right now. Good luck and let us know if you get any where with it. 

I don't think a 2011 retro-fit is possible since they completely changed the bike for 2011.  They went to TBW (Throttle By Wire) and changed the wiring and the communications protocol for the bike.

http://www.customizedcycles.com/

[RCFlyer]

It looks like the link is working now.  They're not cheap $799 for 2004+ Softail.  Call them and see if it'll work with CVO.

http://www.customizedcycles.com/softail_cruise/

[RCFlyer]

Here's a picture of the kit.

[paconico1992]

Has anyone tried this electronic cruise control from Customized Cycles? Their website says it fits all softtails from 2000 on up. I'm calling them Monday to see, and find out if the controls will work on handle bars.
The only down side i'm aware of is, the rear fender and rear tire needs to be removed to install the modulal.
Cruise mount would work also, but the modulal mounts to side of bike inside a chrome box(looks goddy if you ask me). The only plus with this one is you don't need to remove fender and tire.

Any help would be great

[hdbrad03]

Has anyone tried this electronic cruise control from Customized Cycles? Their website says it fits all softtails from 2000 on up. I'm calling them Monday to see, and find out if the controls will work on handle bars.
The only down side i'm aware of is, the rear fender and rear tire needs to be removed to install the modulal.
Cruise mount would work also, but the modulal mounts to side of bike inside a chrome box(looks goddy if you ask me). The only plus with this one is you don't need to remove fender and tire.

Any help would be great

Yes I have installed this kit it is outstanding. I installed on an 08 Softail Heritage. It is a good 6-8 hours work for your first install.

 
     Brad

[MikeV]

I am not aware of any aftermarket cruise controls,  but i do see that the 2011 flstse2 came with cruise control,  so im suggesting that you could retrofit the factory cruise to your bike.   I  have performed lots of factory retrofiting on my flhtcse and i have found that its really pretty easy.  somtimes costly,  but its always an adventure and a lot of personal satifaction in figuring it all out.   

Not this time. The 2011 uses an entirely new wiring system and computer. You would have to retrofit almost every electrical component from the headlight switch on down and would be very cost prohibitive. The aftermarket unit seems to be the best option.

MikeV

[paconico1992]

Thanks for the help.
 Having customized cycle install the cruise control after the front fairing put on.