Topic: Transmission to X pipe bracket (Read 761 times)

oakmtnbody · « **on:** June 04, 2011, 04:41:41 PM »

Hello guys need a little help on Steve's X pipe install.I am changing over from a set of V&H Power Duels to the Fullsac B Pipe on a couple of 2009 SERG's so I have removed all the V&H brackets and reinstalled all oem brackets but the support bracket from the transmission does not line up to the bracket on Steves X pipe.I have put the X pipe on two 2010 SESG and SE Ultra and they fit perfectly but the '10's come with a different silver transmission support bracket than our 09 Roadglides black bracket.Do I need to order the bracket for the 2010 to make it work.I have the pipe snugged up to the heads but oem bracket slot is to the rear of the X pipe slot. I left Steve a message but would like to finish them up before he opens back up Monday.Thanks in advance for any help and just set me straight if I'm just having one of those moments and I did a search and found nothing.

rheiner · « **Reply #1 on:** June 04, 2011, 08:53:58 PM »

Did you get the right x-pipes? The '09 models use 18mm O2 bungs. Did you already check that out?

oakmtnbody · « **Reply #2 on:** June 04, 2011, 09:00:47 PM »

The 02 sensors fit fine,they are the big ones HD used before the change to the small ones in 2010.The oem bracket will only fit the trans housing one way.I ordered two pipes I think I will measure the bracket location on the other one Steve sent me.Thanks for your reply.Mike

Author Topic: Transmission to X pipe bracket (Read 761 times)

oakmtnbody

Transmission to X pipe bracket

rheiner

Re: Transmission to X pipe bracket

oakmtnbody

Re: Transmission to X pipe bracket