Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[North Star]

I printed out the manual that came with the CD, but I don't see it anywhere in there.

Can someone point me out to where it shows how to adjust the speedo for a gear change?

Thanks.

[murphy]

$$$$$$$

http://www.skipfordyce.com/eshopprod_cat_6367-7672-19053_product_932277.TTS_Mastertune_Kit.htm

[North Star]

I didnt recall the speedo option popping up before, but then again, I've only had the TTS plugged in the one time when I initially downloaded my Fullsac map.

I'll give 'er a shot- thanks for the link Murphy.

[ssls6]

When you program a cal the window pop's up like the window for compression release.  The speedo correction is a number in the 2000 range.  Just up it or lower it by the same percentage your speedo is off.

[Boatman]

When you program a cal the window pop's up like the window for compression release.  The speedo correction is a number in the 2000 range.  Just up it or lower it by the same percentage your speedo is off.

X2

I couldn't remember but you change it (speedo) when you are doing the download-bike hooked to computer.

[North Star]

Sorry, just to clarify, do I have to go through the procedure for loading the map again in order to be able to adjust the speedo, or is there steps I can do just to adjust the speedo without having to re-load the map?

Also, I remember in another thread that for a 09 SERG with a 30T pulley, the correction number was 2350- since the values are in the 2000's, does the "350" part represent a 3.5% change?

I'm only doing a 31T, and the way it sits now, the speedo runs about 3-4 mph faster than the GPS speed at 75 mph, but I'll check the difference in indicated vs GPS speed once the pulley is installed, and figure out the percentage difference.

[Steve Cole]

Yes, you need to load Mastertune just as you are going to reprogram to allow for a speedo adjustment.