www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Power Lock Module Location  (Read 2729 times)

0 Members and 1 Guest are viewing this topic.

Rocketman69

  • Mr. Roboto
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 118

    • CVO1: 2012 FLHXCUSE3 Hot Citrus/Antique Gunstock
Power Lock Module Location
« on: October 21, 2012, 03:50:33 PM »
Hey, could one of you SEUC guys help me out with something?  I need to know where the power lock module (receiver) is located on your bikes.  I'm looking through the online microfiche, and they show the module and it's bracket with the other switches and stuff, and the battery tray is shown on another page.  I can't see where this bracket mounts under the side cover.  The P&A power lock kit (obsolete) shows a different bracket for the 2008 bikes, but obviously our frame and battery tray are different.

Even if you could just pop off your side covers and take a couple of pictures for me, I'd greatly appreciate it.  It's probably also listed somewhere in your service manuals....for those of you who have them.  I have a stack of manuals, but none of my bikes are CVO Ultras, so they cannot help me.

Thanks in advance.

-Gib
Logged

Rocketman69

  • Mr. Roboto
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 118

    • CVO1: 2012 FLHXCUSE3 Hot Citrus/Antique Gunstock
Re: Power Lock Module Location
« Reply #1 on: October 22, 2012, 08:03:53 AM »
40 veiws and no responses?...Damn.
Logged

donald p

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 308

    • CVO1: 2008 CVO
    • CVO2: 2013 CVO
    • CVO3: 2020 Tri Glide CVO
Re: Power Lock Module Location
« Reply #2 on: October 22, 2012, 10:34:34 AM »
I was hoping to learn something also.
Logged
.FLHTCUSE8 Anniversary #680
2020 Tri Glide CVO

ultrafxr

  • There are no sure answers, only better questions. - Dick Van Dyke
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5476
  • No problem is so small it cannot be misunderstood.
    • TN


    • CVO1: 2020 FLHTCUTG Tahitian Teal
    • CVO2: 2017 FLHTKSE Palladium Silver/Phantom Blue/Wicked Sapphire-traded
    • CVO3: 2012 FLHTCUSE7 Electric Orange/Black Diamond-traded
Re: Power Lock Module Location
« Reply #3 on: October 22, 2012, 11:03:52 AM »
Here ya' go.  Maybe this will help  This is for a 2012 cuse7. 
Logged



Places ridden on my bike from my driveway.
IBA member # 45520

waynel

  • Hippie
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 103
    • LA


    • CVO1: 2011 Electra Glide Ultra Classic
    • CVO2: 2014 Electra Glide Limited
Re: Power Lock Module Location
« Reply #4 on: October 22, 2012, 11:06:04 AM »
the power lock reciever is in the fairing on the left side looking from the front of the bike. It is mounted on a brace that also holds your fairing stereo speaker
Logged

Rocketman69

  • Mr. Roboto
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 118

    • CVO1: 2012 FLHXCUSE3 Hot Citrus/Antique Gunstock
Re: Power Lock Module Location
« Reply #5 on: October 22, 2012, 11:30:13 AM »
No kidding?  Weird.  I had no idea.  Anyone have a picture of it mounted in place?
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50580
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Power Lock Module Location
« Reply #6 on: October 22, 2012, 11:56:50 AM »
Quote from: waynel on October 22, 2012, 11:06:04 AM
the power lock reciever is in the fairing on the left side looking from the front of the bike. It is mounted on a brace that also holds your fairing stereo speaker

That sounds like the location for the rain gauge air temp gauge sensor.  Same area for both?

FWIW attached is a PDF page from the PDF install doc for the P&A kit to install the wireless locks.  Might be different in an OE install.  But the kit installation shows the receiver to the right side of the battery.  Attached image extracted from the PDF.
Logged

Rocketman69

  • Mr. Roboto
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 118

    • CVO1: 2012 FLHXCUSE3 Hot Citrus/Antique Gunstock
Re: Power Lock Module Location
« Reply #7 on: October 22, 2012, 01:08:00 PM »
Yeah, that's the problem.  I have those instructions, but they're for an '08.....and the battery tray changed completely with the new frame in '09...so I need to see how it is done from the factory on the newer CVO Ultras.
Logged

grc

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14216
  • AKA Grouchy Old Fart
    • IN


    • CVO1: 2005 SEEG2
Re: Power Lock Module Location
« Reply #8 on: October 22, 2012, 01:30:35 PM »
Quote from: Rocketman69 on October 22, 2012, 01:08:00 PM
Yeah, that's the problem.  I have those instructions, but they're for an '08.....and the battery tray changed completely with the new frame in '09...so I need to see how it is done from the factory on the newer CVO Ultras.

Go up to reply #3 from ultrafxr and click on the pdf file he attached.  The late model CVO's have the bracket and module mounted to the radio speaker brace in the fairing, not at the battery tray.


Jerry
Logged
Jerry - 2005 Cherry SEEG  -  Member # 1155

H-D and me  -  a classic love / hate relationship.  Current score:  love 40, hate 50, bewildered 10.

Rocketman69

  • Mr. Roboto
  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 118

    • CVO1: 2012 FLHXCUSE3 Hot Citrus/Antique Gunstock
Re: Power Lock Module Location
« Reply #9 on: October 22, 2012, 01:35:25 PM »
Somehow, I completely missed his reply.  Thanks for pointing me back up to it.  That clears up my questions....now I just have to find another way to do it, since I won't have enough wire to run all the way to the fairing.  Oh well, back to the drawing board.  Thanks again.
Logged
 

Page created in 0.222 seconds with 21 queries.