www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Vance & Hines Power Duals loose nuts  (Read 852 times)

0 Members and 1 Guest are viewing this topic.

Jimharry77

  • Newbie
  • *
  • Offline Offline
  • Posts: 8
Vance & Hines Power Duals loose nuts
« on: August 25, 2011, 01:03:03 PM »
Installed Vance & Hines Power Duals on 2009 FLTRSE and TTS MasterTune. Everything went well but then started getting some "popping" during V tune process. Checked these threads and THANKS good info, first suggestion make sure exhaust is not leaking. Sure enough the exhaust flange bolts were loose must have been my bad. However, I've had to re-tighten several times after about 500 miles. V&H tech that this normal due to the HD bolts??? Anyone experiencing this? Thanks
Logged

LarryB

  • Tennessee Squire
  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3656

    • CVO1: 09 FLTRSE3 The Grey Ghost
Re: Vance & Hines Power Duals loose nuts
« Reply #1 on: August 25, 2011, 02:58:42 PM »
YEP,after the bike comes up to running temp and then cools down you need to re torque
Logged
Take it Easy Greasy Cuz it's a long walk home.

Did I shave my head for this?

NSTY110RIDER

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 175

    • CVO1: 2008 FLHRSE4
Re: Vance & Hines Power Duals loose nuts
« Reply #2 on: August 25, 2011, 04:23:56 PM »
Quote from: LarryB on August 25, 2011, 02:58:42 PM
YEP,after the bike comes up to running temp and then cools down you need to re torque



x2     :2vrolijk_21:
Logged
2008 Screamin Eagle Road King
 

Page created in 0.191 seconds with 25 queries.