Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: It's my turn to b*%ch.  (Read 2747 times)

0 Members and 1 Guest are viewing this topic.

Hank Hankerson

  • Guest
It's my turn to b*%ch.
« on: September 27, 2011, 03:21:55 PM »

Just thought I'd let go of my frustrations by writing it out on here.  This morning I went to take my son to school on the FXR4, warmed it up until the rear rocker box was getting warm, went to throw my leg over the bike to notice a watery looking substance dripping down the primary cover.  Stuck my finger in it, stuck the finger up under the helmet, and what do you know?....frickin' gas dripping out of the petcock.  Of course I shut the bike down, checked it out and the d@*n thing is leaking from the diaphram and the lever. 

No more riding this year most likely as I don't have a trailer to get the thing to La Crosse.  My dad (thankfully) bought an extended warranty, so that $88.00 petcock will be next to free if I can get the bike there.  I drained the gas just to make sure a constant gas drip won't eat the primary gasket or any other adverse effects.  Do you think he should pay the extra couple bucks and get a Pingle one with/without the vacuum, or should he just get a stock H-D one installed.

Fun's over, but it was great while it lasted...all 911 miles I put on in the last month and I didn't have to pay a dime for it.  Here's to a wonderful father that let's me ride his bike.  Thanks for listening and thoughts on the petcock would be appreciated. 
Logged

johnsfxr2

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: It's my turn to b*%ch.
« Reply #1 on: October 03, 2011, 11:50:30 AM »

I had the same Harley petcock on my Sportster before I bought the FXR2 in 1999. The Sportster petcock shut down on me so I needed a new one. When I got the FXR2 I immediately changed the petcock to a Pingel and have not had a problem ever and that's been 12 years.
Logged

muddypaws

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5280
  • 2012 FLHTCUS7

    • CVO1: 2005 CVO
    • CVO2: 2009 CVO SEUC
    • CVO3: 2017 CVO LIMITED
    • Re/Max
Re: It's my turn to b*%ch.
« Reply #2 on: October 03, 2011, 11:56:21 AM »

It's a Harley and they break. That actually break a lot......
Logged
Bill

naitram

  • SMF Administrator
  • 10K CVO Member
  • ******
  • Offline Offline
  • Posts: 12667
    • MA


    • CVO1: FLTRXSE2 "Marvin"
Re: It's my turn to b*%ch.
« Reply #3 on: October 03, 2011, 12:06:52 PM »

so 11 yrs out of a stock petcock isn't enough for you?  :nixweiss:
Logged
:cool26: naitram...


"I reject your reality and substitute my own."
"Work is the curse of the drinking class."

faceracer

  • Faceracer
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1042
  • 2019 FLHRXS Road Kind Special
    • KY


    • CVO1: 2019 FLHRXS Road King Special (not a cvo)
Re: It's my turn to b*%ch.
« Reply #4 on: October 03, 2011, 12:18:59 PM »

I reccommend the Pingel. Screw that vacuum crap. Just one more thing to go wrong! JMHO :nixweiss:
Logged
2019 FLHRXS Road King Special
2016 FLSS Softail Slim Special
2009 CVO Road Glide FLTRSE3
2007 Cobalt Blue FLHX
2001 Chrome Yellow & vivid Black FXDL
1985 Candy Red FXRS
1955 Triumph T110 Tiger chopper built by me!

miker

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8710

    • CVO1: 2009FLHTCUSE4
Re: It's my turn to b*%ch.
« Reply #5 on: October 03, 2011, 12:30:53 PM »

Pingel.  :drink:
Logged

Rooster

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 5180
  • FLhtcuse2.ORG
Re: It's my turn to b*%ch.
« Reply #6 on: October 03, 2011, 02:07:18 PM »

Pingel. Put one in my WG been there since bike was almost new no problems. Back in 96 HD had a rash of bad stock petcocks. Talked dealer into replacing with Pingel since there was no revised stock ones yet and no one had a stock one.
Logged

Buy early

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 8679
  • My future if I were Benjamin Button

    • CVO1: 2001 FXDWG2 Switchblade - The Beast
    • CVO2: 2004 FXSTDSE2 Deuce - Beauty
Re: It's my turn to b*%ch.
« Reply #7 on: October 03, 2011, 02:09:28 PM »

Pingel. Put one in my WG been there since bike was almost new no problems. Back in 96 HD had a rash of bad stock petcocks. Talked dealer into replacing with Pingel since there was no revised stock ones yet and no one had a stock one.

Another vote for the Pingel.
Logged

Frisco kid

  • Newbie
  • *
  • Offline Offline
  • Posts: 21
  • 1999 H-D FXR3
Re: It's my turn to b*%ch.
« Reply #8 on: October 14, 2011, 04:16:28 PM »

Whats the part number for the pingel?
Or what is the size thread on the bung?
Thanks.
Logged
Live free or die like a rat in a trap.

1999 FXR3
EV27 Cam, Adjustable push rods, S&S Carb, Crane Single-Fire, RB Pipe.

Shovelhead

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 222

    • CVO1: 2008 FXDSE, SERT, SE Heavy Breather, V & H Big Radius 2 into 1, S&S 585 gear-driven cams, Rivera tapered adjustable pushrods, H-D Oil cooler, Baker DD7, SE Compensator, SOHB Wedge Tensioner
Re: It's my turn to b*%ch.
« Reply #9 on: October 15, 2011, 02:47:58 PM »

I have a Pingel on the the Stroker Shovel , indestructible !
Logged
.....started off having a great day this morning,had not been lied to or treated like a fool, then I visited an H-D dealer service dept

AXIL

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 2579
Re: It's my turn to b*%ch.
« Reply #10 on: October 15, 2011, 05:18:04 PM »

   I have fixed all most as many pingels (orings) as i have fixed hd petcocks. there are 4 or5 times as meny hd petcocks(fuel cut off's) then there are pingels, a little math would tell me none of them are a end all fix to a problem
 that does not exists.  just my two cents.    axil
Logged
I CAME INTO THIS WORLD WITH NOTHING AND I GOT MOST OF IT LEFT  
AHH,MOONSHINE THE OTHER WHITE MEAT
 

Page created in 0.142 seconds with 21 queries.