Topic: More sound from stock pipes (Read 1478 times)

bad00serg · « **on:** June 30, 2006, 10:56:35 PM »

Hey guys - any mods that can be done to the stock pipes on my 2000 SERG to get more rumble? TIA

Pana-guy · « **Reply #1 on:** July 01, 2006, 12:36:27 AM »

At the back of the mufflers there is a knock out plug that can be (forcefully) removed. Allows the exhaust flow to mostly bypass out though the baffle.

Did it when I had mine. Not a bad sound and not obnoxiously loud either.

Eventually wound up buyin a set of Vance & Hines slip-ons (and $400 later )

Good alternative to buying a new set of slip-ons.

arcticdude · « **Reply #2 on:** July 04, 2006, 10:39:07 PM »

Did the same (knocked out the extra plug in the output end of the pipes). We like it. It offers a good rumble/output, without getting too loud. Though some good rineharts would definitely do it justice.

Ed Ramberger - One_Screamin_Eagle · « **Reply #3 on:** July 09, 2006, 10:34:00 AM »

Quote

At the back of the mufflers there is a knock out plug that can be (forcefully) removed. Allows the exhaust flow to mostly bypass out though the baffle.
quote]

You don't need any force. The plug (actually an automotive freeze plug) is only held in with a couple little tack welds. Dremel off the tacks, and it will be easy from there.

Author Topic: More sound from stock pipes (Read 1478 times)

bad00serg

More sound from stock pipes

Pana-guy

Re: More sound from stock pipes

arcticdude

Re: More sound from stock pipes

Ed Ramberger - One_Screamin_Eagle

Re: More sound from stock pipes