www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: How much HP?  (Read 1885 times)

0 Members and 1 Guest are viewing this topic.

MDUltra

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 70

    • CVO1: 2012 FLHXSE
    • CVO2: '03 Springer
    • CVO3: '08 Ultra SE sold
How much HP?
« on: November 09, 2011, 10:02:16 PM »
I've been searching for an answer to the question as to how much horsepower and torque we have with a stock 110 CVO? Considering a sea level standard day. Any ideas?

Just left the dealer where they're running my '12 SG on the dyno. With X-pipe and 2"cores they think it's 95.7hp and 107 tq

I understand there are differences dyno to dyno

Steve?
Logged

RedDevil

  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 6170
  • EBCM #747.2 It's all good

    • CVO1: '11 FLTRUSE Gray Ghost
    • CVO2: '12 FLHXSE3 Hot Citrus/Antique Gunstock
Re: How much HP?
« Reply #1 on: November 10, 2011, 09:47:08 AM »
I believe the stock 110 comes in at around 80 HP/95 TQ.  Typical gains are normally with just a header/muffler replacement, are roughly 10HP give or take one or two and 10-12 ft/lbs TQ.  

:devil:
Logged

2012 FLHXSE3
Hot Citrus/Antique Gunstock

Fullsac Performance

  • Vendor
  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1753
  • Never ride with a Halfsac! Insist on Fullsac Perf!
    • AZ

    • Fullsac Performance
Re: How much HP?
« Reply #2 on: November 10, 2011, 10:20:03 AM »
Quote from: MDUltra on November 09, 2011, 10:02:16 PM
I've been searching for an answer to the question as to how much horsepower and torque we have with a stock 110 CVO? Considering a sea level standard day. Any ideas?

Just left the dealer where they're running my '12 SG on the dyno. With X-pipe and 2"cores they think it's 95.7hp and 107 tq

I understand there are differences dyno to dyno

Steve?
Your numbers look pretty typical.  Do you have a baseline run? Testing Percentage of gain is what a dyno is really good for.

SG
Logged
Steve@fullsac.com  www.fullsac.com
Never argue with idiots. They will beat you with experience.

sadunbar

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11416
  • EBCM # Stealth - SSBS # 1.1 - SoA # Z&E2525 .01%
    • IL


    • CVO1: 2007 FLHTCUSE2
    • CVO2: 2000 FXR4
Re: How much HP?
« Reply #3 on: November 10, 2011, 02:33:00 PM »
Quote from: Fullsac Perf on November 10, 2011, 10:20:03 AM
Your numbers look pretty typical.  Do you have a baseline run? Testing Percentage of gain is what a dyno is really good for.
SG

Steve makes exactly the right point...   :2vrolijk_21:

You're looking for improvement in your bike...before and after a change...with the same dyno and operator.  Comparisons between other dyno's and other dyno operators can be complicated and frustrating... 
Logged
2007 Screamin Eagle Ultra Classic - Light Candy Cherry and Black Ice
Screamin Eagle 120r
Revolution Performance EMS
Fuel Moto Jackpot headpipes and 4.5" Pro Touring Mufflers
HPI 55mm Throttle Body w/5.3 injectors
BDL clutch w/VPC92T
Traxxion AK-20
Legend Air Suspension
Brembo Brake Calipers/Rotors
Garmin Zumo
575 Chubby's
Bushtec Quantum

MDUltra

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 70

    • CVO1: 2012 FLHXSE
    • CVO2: '03 Springer
    • CVO3: '08 Ultra SE sold
Re: How much HP?
« Reply #4 on: November 10, 2011, 08:27:23 PM »
Just got it back from the Dealer Dyno

Hp 85.58 base to 96.61 final ( I had a Rush True Dual and SE Tuner)

TQ 103.55 to 07.15 final

5 hrs on the Dyno. Can't wait to ride!

I have the file If anyone's interested. pm me

MD
Logged
 

Page created in 0.136 seconds with 25 queries.