www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 [2]  All

Author Topic: Footboard Spacer  (Read 4325 times)

0 Members and 1 Guest are viewing this topic.

kiwihog

  • KIWIHOG
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 819

    • CVO1: 2011 FLTRUSE Rio Red & Black
    • CVO2: 2007 FXSTDi NON CVO
    • CVO3: 2016 FLTRUSE
Re: Footboard Spacer
« Reply #15 on: March 06, 2012, 05:08:22 PM »
gear side
Logged
Things I have had to buy because of this site 2.0 fullsac baffles, PV tuner, glare polish, floorboard extn, clearview w/shield, locking lower doors, motorcycle armour, bass ports in tourpac, Iron aces mount for Power Vision Tuner V&H Power duals
and not close to finished!!!

Sajour

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: Street Glide CVO 2012/Hot Citrus
    • CVO2: Road Glide 2006/Black Pearl
    • CVO3: Heritage Classic 1997/Yellow-White
Re: Footboard Spacer
« Reply #16 on: March 06, 2012, 08:18:17 PM »
Guys, I need your expertise. I'm going to change the rears pegs for footboards. My bike is a 2012 CVO SG.
Could you have info about the part number? :nixweiss:
Logged
M.Sajour

2018_FLTRXSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2244
    • HI


    • CVO1: 2018_FLTRXSE, Gunship Grey, (Delivered July 28, 2018... after almost 9 )
    • CVO2: 2001_FLTRSEI, Grey/Black/Silver w/Hannigan Hack and a blast to ride.
Re: Footboard Spacer
« Reply #17 on: March 06, 2012, 09:08:04 PM »
kiwihog,

there was reference to the Kury spacers moving the boards forward as well as outboard... can you clarify?...

I opted for the Harley goodies 1" ones.. as I dont see the 1/4" making that much of a difference in bank angle as compared to the 3/4"...

On my 08 Street Glide I used to drag hte boards easily... neveer had that issue with the new (09-up) Chassis.

Logged
If it has wheels or other things that excite you... RIDE IT!

kiwihog

  • KIWIHOG
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 819

    • CVO1: 2011 FLTRUSE Rio Red & Black
    • CVO2: 2007 FXSTDi NON CVO
    • CVO3: 2016 FLTRUSE
Re: Footboard Spacer
« Reply #18 on: March 06, 2012, 10:13:35 PM »
Quote from: 2012_FLTRXSE on March 06, 2012, 09:08:04 PM
kiwihog,

there was reference to the Kury spacers moving the boards forward as well as outboard... can you clarify?...

I opted for the Harley goodies 1" ones.. as I dont see the 1/4" making that much of a difference in bank angle as compared to the 3/4"...

On my 08 Street Glide I used to drag hte boards easily... neveer had that issue with the new (09-up) Chassis.


If you check out the pics I posted you can just see the brackets used kind of "L" shaped with a solid single mount on one end and a pivot double fitting on the original mount end floorboards still pivot and I havnt come close to scaping them on the road with the forward movement I can now rest my heels comfortably on the board and my toes on the hiway pegs
Logged
Things I have had to buy because of this site 2.0 fullsac baffles, PV tuner, glare polish, floorboard extn, clearview w/shield, locking lower doors, motorcycle armour, bass ports in tourpac, Iron aces mount for Power Vision Tuner V&H Power duals
and not close to finished!!!

kiwihog

  • KIWIHOG
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 819

    • CVO1: 2011 FLTRUSE Rio Red & Black
    • CVO2: 2007 FXSTDi NON CVO
    • CVO3: 2016 FLTRUSE
Re: Footboard Spacer
« Reply #19 on: March 06, 2012, 10:31:21 PM »
I did a quick outline on wordpad to show shape of extns hope it helps
Logged
Things I have had to buy because of this site 2.0 fullsac baffles, PV tuner, glare polish, floorboard extn, clearview w/shield, locking lower doors, motorcycle armour, bass ports in tourpac, Iron aces mount for Power Vision Tuner V&H Power duals
and not close to finished!!!

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Footboard Spacer
« Reply #20 on: March 06, 2012, 10:42:00 PM »
Quote from: 2012_FLTRXSE on March 06, 2012, 09:08:04 PM
kiwihog,

there was reference to the Kury spacers moving the boards forward as well as outboard... can you clarify?...

I opted for the Harley goodies 1" ones.. as I dont see the 1/4" making that much of a difference in bank angle as compared to the 3/4"...

On my 08 Street Glide I used to drag hte boards easily... neveer had that issue with the new (09-up) Chassis.



If I'm not mistaken, the "regular" '08 Street Glide was lowered an inch, front and rear.  Actually, the Street Glide was born from a pornographic asexual joining of the '04 and '05 SEEG.  The SG was born in '06 after a long and complicated pregnancy.  Before free contaceptives... I have the film to prove it... ::) :huepfenlol2:
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

2018_FLTRXSE

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2244
    • HI


    • CVO1: 2018_FLTRXSE, Gunship Grey, (Delivered July 28, 2018... after almost 9 )
    • CVO2: 2001_FLTRSEI, Grey/Black/Silver w/Hannigan Hack and a blast to ride.
Re: Footboard Spacer
« Reply #21 on: March 07, 2012, 12:15:06 AM »
Quote from: kiwihog on March 06, 2012, 10:31:21 PM
I did a quick outline on wordpad to show shape of extns hope it helps


OK.. light bulb came on bright.. I get it now.. the Kury link in this thread took me to another spacer.... looked just like the Harley goodies one..
Logged
If it has wheels or other things that excite you... RIDE IT!

Bigtow

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
  • Double Diamond

    • CVO1: FLHXSE3
Re: Footboard Spacer
« Reply #22 on: March 08, 2012, 08:38:02 PM »
Quote from: Sajour on March 06, 2012, 08:18:17 PM
Guys, I need your expertise. I'm going to change the rears pegs for footboards. My bike is a 2012 CVO SG.
Could you have info about the part number? :nixweiss:
This is the way I went
Rumble collection
Insert #51510-09
Insert #51502-09
Pans #50357-04
Pan mount to frame #53070-00A
You will also need service parts that are not included
Pivot pins 4 needed #50933-86
Ball 2 needed #8860
Spring 2 needed #33085-74
The rumble collection is the exact match riders foot boards. Then take your pegs and make them highway pegs good luck
Logged

Bigtow

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 53
  • Double Diamond

    • CVO1: FLHXSE3
Re: Footboard Spacer
« Reply #23 on: March 08, 2012, 08:48:26 PM »
Quote from: Midnight Rider on March 06, 2012, 04:35:38 PM
Just something to be aware of guys...if your bike is lowered, moving the boards out too much can cause some serious issues going through the twisties, as in the floorboard brackets dragging instead of the underside of the floorboards themselves, which fold up a bit so it's not a problem.  The floorboard brackets will lever the rear wheel off the pavement...that's happened to one member here already.  The Kury spacers are 3/4" and they don't seem to cause problems, but when you start getting further out than that, it might be a good idea to ensure hard, unforgiving parts won't hit the pavement before the floorboards themselves.  There's a reason those front floorboards fold up under slight pressure.

If you've got a bike with full height suspension, front and rear, you can probably get away with 1" spacers  :nixweiss:, but if you've got a SESG, SEEG, or SERGC with the 1" lower rear (SEEG is lower front and rear), I'd be checking clearances out before going to a 1".  I'd be very apprehensive with anything over 1", regardless of bike model.
Thanks a lot for the info, make sense I went with ¾ spacer.
Logged

Sajour

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 57

    • CVO1: Street Glide CVO 2012/Hot Citrus
    • CVO2: Road Glide 2006/Black Pearl
    • CVO3: Heritage Classic 1997/Yellow-White
Re: Footboard Spacer
« Reply #24 on: March 08, 2012, 09:05:14 PM »
Bigtow, thank you very much. I'll send you pics when I finished. :2vrolijk_21:
Logged
M.Sajour
Pages: 1 [2]  All
« previous next »
 

Page created in 0.212 seconds with 21 queries.