Topic: Metzeler 140/70-21 front tire (Read 1225 times)

JWKHD1 · « **on:** July 25, 2012, 01:57:51 PM »

Does anyone have any experience with this tire.I know the fender needs to be raised .I am running a 120/70-21 metzeler now and am looking to increase load rating, and maybe improve handling with the wider tire.

hogasm · « **Reply #1 on:** July 25, 2012, 06:47:40 PM »

I had problems with this tire when I tried it out, ended up too wide for the fender I was using at the time. ended up going back with the 120.

It worked well for others with the stock fender or a wide aftermarket one.

JWKHD1 · « **Reply #2 on:** July 26, 2012, 03:31:41 PM »

Thanks.I assume not fittinh w/your fender was the only problem. JWK

hogasm · « **Reply #3 on:** August 02, 2012, 09:59:51 PM »

I was using an aftermarket fender for the 21" tires. It was just too narrow for the 140

jagonza1 · « **Reply #4 on:** August 19, 2012, 10:28:53 PM »

when you put the tire on it should be the same profile as the 120-70-21 so slip the tire in and see if you can rais the tire past the axle. I bet you will find you have 1/2 to 3/4 "clearance if you don't take the fender off and you should be able to slot the fender hole and raise it enough.
later
John

Author Topic: Metzeler 140/70-21 front tire (Read 1225 times)

JWKHD1

Metzeler 140/70-21 front tire

hogasm

Re: Metzeler 140/70-21 front tire

JWKHD1

Re: Metzeler 140/70-21 front tire

hogasm

Re: Metzeler 140/70-21 front tire

jagonza1

Re: Metzeler 140/70-21 front tire