Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Aussie]

Cruising at 2000rpm, let go of left hand grip and it shakes and the clutch lever make a rattle sound.
Doing the same to the right side and its perfect, no shaking or rattles.
Any ideas what could be causing this.

[dayne66]

Same thing on mine...also did it on my '08 Ultra....just keep the revs up.

[Bowman1836]

Same here 2012 cvo street glide. It has always did this. I'm getting yaffe monkey bars put on so well see if it goes aways. I doubt it though.

[cvobiker]

Place a wood dowl in the left bar, say 4-5" long. 

[Thermodyne]

You can put some weight on the bar, grip ends, lead slug, lot of ways to deaden it. 

But you really need to drop a gear and keep it above 2000RPM.  At that engine speed it still lugging, and sooner than later it's going to eat the compensator.

[dayne66]

Place a wood dowl in the left bar, say 4-5" long. 

With all the wires (and possibly Heat Demons) in there, I think, installing any kind of weight is easier said than done.

[willyB]

My 2011 did the same thing. It is the spacing in the pin and ring clip that holds the clutch lever to the assembly. It took me a while to figure it out. After much searching I finally found a very thin UHMWP (Ultra High Molecular Weight Poly Ethalene) washer that accomodated for the minor play in the pin and ring clip. Problem solved!