Topic: Check pin no. (Read 1228 times)

98fxstc · « **on:** March 07, 2013, 09:35:32 PM »

Hi All
I set the pin number in the bike and didn't write it down.

I usually use 4 or 6 digits for pin but bike is 5 so I don't remember how I modified it.
I checked the 'changing the pin' in the handbook.
After going thru the initialisation process to change the pin , the current pin comes up with the first digit flashing.
If I switch the ignition off at this point , I have viewed the current pin and then stored it again ?
Or will I lose it?
Do I have to go thru the process of entering the pin as each digit flashes and store it again?
Thanks

Twolanerider · « **Reply #1 on:** March 07, 2013, 09:40:45 PM »

The current PIN is what is displayed. Flashing digit can be changed from it's current selection. So you can either leave it be (having learned what it is) or change it to something new from its current selection.

98fxstc · « **Reply #2 on:** March 07, 2013, 10:47:39 PM »

Thanks Don.
Thats pretty much what I figured.
I didn't want the risk of corrupting the existing pin by exiting with a flashing digit.
I thought I'd get a second opinion before I started to play.

Twolanerider · « **Reply #3 on:** March 07, 2013, 10:56:15 PM »

Quote from: 98fxstc on March 07, 2013, 10:47:39 PM

Thanks Don.
Thats pretty much what I figured.
I didn't want the risk of corrupting the existing pin by exiting with a flashing digit.
I thought I'd get a second opinion before I started to play.

Author Topic: Check pin no. (Read 1228 times)

98fxstc

Check pin no.

Twolanerider

Re: Check pin no.

98fxstc

Re: Check pin no.

Twolanerider

Re: Check pin no.