www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Rear Pulley Comming Apart  (Read 3770 times)

0 Members and 4 Guests are viewing this topic.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1223
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Rear Pulley Comming Apart
« on: July 02, 2013, 11:54:47 PM »
This morning when backing up my bike to go for a Ride I heard a scraping noise similar to break pad/rotor
Noise. What I found was that the rear pulley inner belt guide come loose and fell on the center of the rim.Has anyone had this happen to them? Well I removed the two pulley prices and took it to the local shop where they remounted it by peening the edges of the pulley where it mates the steel ring and added
four # 8-32 s screws to make sure it does not come off again! This was a Genuine Harley part! A 68 tooth
1.125" pulley! It is fixed now. Strange problem. I will try to get a pic that not a large file.
Ltank
Logged

05Train

  • Mind is not for rent
  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 769
Re: Rear Pulley Comming Apart
« Reply #1 on: July 03, 2013, 06:28:43 AM »
That happened on my 2010 FLHTK.  Dealer caught it during a tire change before it came all the way apart and replaced it under warranty.  Yours is the only other instance I've heard of this happening.
Logged
The best you've had is the best you know.

ltank

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 1223
    • LA

    • CVO1: 2000 FXR4 S&S V111, CustomS.S. 2-1 exhaust, Primo-Rivera OD 6 speed, 49mm Custom Front End Ohlins 30mm Fork cartridges , Hyperpro Shocks, Barnett Scorpian Clutch
    • CVO2: 1983 88" Shovelhead Won the World of Wheels 1985 Sept 85 Issue of Hot Bike Mag
    • CVO3: 1989 FXRS, 1990 Custom 100" Shovelhead/ EVO
Re: Rear Pulley Comming Apart
« Reply #2 on: July 03, 2013, 03:25:31 PM »
Here is a photo of the pulley with the inboard side facing up. Hope I can attach pic from phone
Ltank
Logged

JoeSDE

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 163
    • DE

Re: Rear Pulley Comming Apart
« Reply #3 on: July 03, 2013, 09:18:38 PM »
Happened on my 2010 FLHTK when it was new. Best part was service manager asked if I would replace it myself when the new pulley came in. Would have to wait a week---they were busy. No problem.      JoeS
Logged
 

Page created in 0.204 seconds with 25 queries.