Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Soot]

Has anyone out there put WO575's on their 2013 FLHTCUSE8? I cannot seem to find anything on it specifically and if so, did you have to change the hydraulic clutch line or the brake line? Thank you!

Soot

[grc]

You shouldn't need to limit it to 2013 models, since the bars have remained pretty much the same over the history of the CVO Ultra.  Try some of the threads in the following search results list:

WO575 Search

Jerry

[Soot]

thanks GRC - I will give it a try. Apparently something was changed on the 2013 with the hydraulic clutch connection. To be continued.........

[grc]

thanks GRC - I will give it a try. Apparently something was changed on the 2013 with the hydraulic clutch connection. To be continued.........

The connection at the trans side cover changed, not the connection at the master cylinder.  So if the stock line will still fit and have proper slack with the new bars, you're good to go.  If the stock line has to be changed, from what I've read so far you may have to get a custom line made.  Where there is a will, there is always a way.  I know some on the site have changed the clutch line; if you don't find their posts in that search then hopefully one of them will see this and chime in.

Jerry

[Soot]

Thanks Jerry.   Very helpful
     

[REDMAN]

Had mine changed out last week to the 575's. All lines had enough slack in them so we did not have to change out any of them. Good luck, and you will love the new bars.

[Soot]

Thanks a lot Redman - good to know going in!!