Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Mr D]

Any SESG owners install the Mo Co. Batwing Pullback Handle Bar?
If so, did you have to install a set of handle bar mirrors? Can that bar be internally wired?
I know there is a thread already posted re: the 575's and a couple of riders were able to get by with the inner fairing mirrors..... The 575's to my liking are a bit wide from grip to grip.
Any tried feedback is appreciated.

Thanks Riders

[3mcam]

I installed a set of the HD Touring Pullback Bars. I did not have to replace my mirrors or cables. I did re-adjust the bars to help minimize the interference with my hands.

[Mr D]

I installed a set of the HD Touring Pullback Bars. I did not have to replace my mirrors or cables. I did re-adjust the bars to help minimize the interference with my hands.

Thanks for the info,
Were you able to internally wire the bar like factory on the CVO?

Any pics available?

[3mcam]

Yes. I had no problems running the internal wires. I even added Heat demons for the grips. Its not a hard job just time consuming. And you need special tools to remove the pins from the connectors and a special toll for the ignition switch. Do a search on this site. There is a complete step by step somewhere. It really helped me complete my change out. Good Luck.