Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FnYello]

Morning!
I have moderate to severe tendinitis in my left hand, elbow and shoulder. No doubt made worse by my years of riding. Recently, I have found it to be very difficult to work the clutch on my 05 FLHTCSE2 and keep it in the friction zone for very slow riding. I know the clutch is hydraulic, but is there anything that I can do to make it easier to engage and hold on to? It is original and with no modifications. Any help or suggestions would be appreciated!

[spydglide]

I feel your pain (in the clutch hand literally), but don't know of any methods of lessening the clutch pull.  The hyradulic clutch is soooo much easier than previous clutches, that I just grin and bear it.  spyder

[Twolanerider]

Check out this part:

http://clutchwiz.com/


Haven't personally used but have read very satisfied reports from others.  The part does work on bikes with hydraulic clutch.

[Boatman]

Clutch Wiz works great with SE clutch spring.

[LovemyCVOgirl]

Check out this part:

http://clutchwiz.com/


Haven't personally used but have read very satisfied reports from others.  The part does work on bikes with hydraulic clutch.

I can tell you that I use the clutch wiz on my 2012 CVOSG and it made a HUGE difference with the clutch pull. 

[spydglide]

Is there a 'down-side'?

[Boatman]

Is there a 'down-side'?

The maker wants you to put in a heavier clutch spring or the clutch can slip on some applications.

[LovemyCVOgirl]

The maker wants you to put in a heavier clutch spring or the clutch can slip on some applications.

I did install the heavier spring and it wasn't that costly.