Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: High Temp Copper Silicone  (Read 1369 times)

0 Members and 1 Guest are viewing this topic.

SE-5

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 76
High Temp Copper Silicone
« on: November 11, 2013, 09:28:06 PM »

Installing new Reinhart exhaust on my CVO, instructions (actually read them) say to use some but I've never seen it before.  Dealership parts dept., auto parts store? Thanks.
Logged

krypto2011

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 313
Re: High Temp Copper Silicone
« Reply #1 on: November 11, 2013, 09:33:43 PM »

Any auto parts store will stock it. Any good one anyways.
Logged
2011 SESG Krypto/Black Diamond, SE 259e cams, SE 5.3 injectors, HPI 58mm throttle body, heads ported and polished, V&H power duals, CFR mufflers, SE race tuner, SE high flow air filter

Dan_Lockwood

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2497
Re: High Temp Copper Silicone
« Reply #3 on: November 12, 2013, 12:55:23 PM »

That Permatex Copper Silicone works great.

It's a must have for sealing up Shovelhead pipes at the heads.
Logged
Dan

2009 SERG Orange / Black
Board Track Racer Project, Ultima 113"/6spd
2021 Coleman UT400 Side By Side
 

Page created in 0.232 seconds with 25 queries.