Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: 2013 cvo road king exhaust question  (Read 2318 times)

0 Members and 1 Guest are viewing this topic.

Smitty082261

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
2013 cvo road king exhaust question
« on: February 19, 2014, 10:59:34 AM »

I just bought a 2013 cvo platinum road king and I am adding Vance Hines dual head pipes and Rinehart 4" mufflers. My question is do I have to put a tuner on it. It seems it should run fine without one. Not looking for more power just sound. Thanks in advance
Logged

2k

  • My ignorance is just as good as your knowledge, when my information changes, I alter my conclusions
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7999
  • monter le cheval de fer (French)
    • NC


    • CVO1: 2013 SERK-Dressed in BLUE of course.
    • CVO2: 2002 Supercharged HD F150 512 RWHP
    • CVO3: 1956 BelAir Sports Coupe
Re: 2013 cvo road king exhaust question
« Reply #1 on: February 19, 2014, 01:49:56 PM »

When you dump the cat and the restrictive baffels, you are increasing the exhaust flow a bunch. For optimum performance you will need a tuner. Can you ride it without one? Sure. If money is tight try it and see how you like the performance, but I would stay away from full throttle runs.
Logged
Most Honda Goldwing riders will blink when hit in the head  with a ball-peen hammer (sans helmet)

Smitty082261

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: 2013 cvo road king exhaust question
« Reply #2 on: February 19, 2014, 01:53:06 PM »

Thanks. Money is not the issue. I just thought the ECM would adjust to the o2 sensors
Logged

Tru-Blu

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 231
    • MI


    • CVO1: 2013 Road King in Sapphire Blue (Saphira)
Re: 2013 cvo road king exhaust question
« Reply #3 on: February 19, 2014, 02:03:57 PM »

I thought that removing the catalytic converter also affects the exhaust mixture in that the bike ends up running leaner.  A tune is supposed to compensate for that so that the bike's mixture is closer to what the engine is expecting.  The tangible results are supposed to be a slight increase in horsepower and a decrease in engine temperature.

Personally, I'd recommend a tune either from a shop/tuner or doing it yourself ala TTS.
Logged

phato1

  • 2.5K CVO Member
  • **
  • Offline Offline
  • Posts: 3644


    • CVO1: 2011.5 FLHTCUSE6 - SOLD
    • CVO2: 2001 FLSTFI - non CVO, but really cool
Re: 2013 cvo road king exhaust question
« Reply #4 on: February 19, 2014, 06:48:55 PM »

Thanks. Money is not the issue. I just thought the ECM would adjust to the o2 sensors

The ECM could have done that with JUST a muffler change. Changing the mufflers AND the headpipes requires a tuning device.

 I use the TTS but there are other options.
Logged
"The solutions are all simple....after you have arrived at them."     - Robert M. Pirsig

Smitty082261

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: 2013 cvo road king exhaust question
« Reply #5 on: February 19, 2014, 10:23:13 PM »

Thanks a mill
Logged
 

Page created in 0.203 seconds with 21 queries.