Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[rossn2]

Hi, new member here.
Getting the WO 578's installed on bike today. From reading here and talking to Wild1 production should not have to replace brake or clutch (hydraulic) cables or install wiring kit extender either.  Is this correct?  What do you all mean by rerouting clutch hydaulic cable or is it simply cutting some zip ties within the fairing area?  thanks

[rossn2]

No one here has put WO 578's on a 13 CVO Ultra?

[dooinit2u]

Should be the same install as my '10 SEUC. Didn't have to do any new lines or wiring. The Indy had to reroute the clutch line around the radio in the fairing, but that's it.

PIC OF THE WILD1 BARS

[rossn2]

Great, thanks...

[rossn2]

Wild1 Chubby's W)578 installed.
Before and after pics. HD Dealer didn't believe they could be installed without new cables and wire extensions.
Thanks for all the input on this forum. Installed at HD Dealer (bars, install labor, shop fees, yearly state inspection sticker = $510 OTD), They broke wires for the heated grips, so getting new heated grips..

[rossn2]

After

[rossn2]

After

[tdowell65]

I had this done and by far was the best money I spent on the bike.  I had to do one cable extension and cost me about $800 total but so glad I did. 
Makes riding the bike like sitting in an easy chair on the Hwy. 

[Bigfoot16]

Looks great!

[Beach Bum]

Rossn2,
Handlebars look great.  I also noticed your 2 bag pouch sitting on top of your padded dash.   Could you tell me where the windshield pouch came from? Thanks.

[rossn2]

Sorry for late response was up in NH for Laconia Bike week...

Those are BOSS BAGS for an Ultra. They do fit, you have to push down on them a little bit to get them to stay tight when tightning the three windhsield screws.

http://www.bossbags.com/