Topic: Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........ (Read 762 times)

East Coast · « **on:** July 03, 2014, 08:32:19 PM »

Looking to put one on my 2002 Softail, does anyone know if the RSD nostalgic cam gear cover will fit with gear driven cams without modification? I have read some folks modified the stock HD cam cover after installing gear cams. I dont know if the builder had to alter mine when the motor work was done a few years ago. I tried calling RSD today, no answer. Looking to pull the trigger on one asap.

thanks in advance!

Erich

hrdtail78 · « **Reply #1 on:** July 04, 2014, 02:43:23 AM »

Best thing to do is follow the S&S instructions and check for clearance.

prodrag1320 · « **Reply #2 on:** July 04, 2014, 08:27:47 AM »

ide be calling RSD,them cover are pretty pricey and ide want to know before buying one

East Coast · « **Reply #3 on:** July 04, 2014, 12:29:54 PM »

Thanks gents. Yes, pricey indeed! I'm going to wait until I speak to someone at RSD.

Author Topic: Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........ (Read 762 times)

East Coast

Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........

hrdtail78

Re: Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........

prodrag1320

Re: Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........

East Coast

Re: Roland Sands Nostalgic Cam Gear Cover fitment with gear driven cams........