Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gmeikle]

I did ask a similar question a few months back and had a fair few replies, but no luck or success

I am looking for a calibration for the Supertuner from anyone who has fitted an "1800 pro-upgrade kit" to a 2013 CVO Breakout. kit has 259e cams , 10.5:1 pistons and a Supertuner dongle.My Bike has Freedom Performance true duals

025 level Software , so apparently it's 2013 CVO Breakout only.

I know the kit fits all manner of other Harleys , and there are starter cals for all of them EXCEPT the 2013 CVO Breakout

Even the 2014 CVO Breakout you can use a Dyna/Touring cal to start apparently as the software is similar / the same .

Obviously I'm trying to pick up a cal from anyone who has Dyno tuned a 2013 CVO Breakout with the 1800 pro' Kit ?

I have had a calibration from a reputable Dyno tuner in Australia , and the cal runs very well up the revs , but is lumpy and hunting down low when you're riding around town. That may be the different exhaust on the Dyno tuned "donor" bike. it had V&H slip-ons and my bike has freedom Performance true duals.

Thanks in advance from Perth Western Australia gents

[gmeikle]

I'm surprised there have been no responders to this request ?

2013 CVO Breakout with the dealer installed " 1800 Pro-upgrade kit " including SEPST Supertuner( comes in the kit !)

Has to be a 2013 ( bummer ) as it's Software platform is "an orphan". Why is/was that ?

thanks in advance from Perth Western Australia