Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: SERT Map for 2006 FLHTCUSE  (Read 606 times)

0 Members and 1 Guest are viewing this topic.

patrickt

  • Newbie
  • *
  • Offline Offline
  • Posts: 44

    • CVO1: 2006 FLHTCUSE
SERT Map for 2006 FLHTCUSE
« on: September 16, 2014, 09:33:22 PM »

Hey all,

Long time since I have been on here.  And this is an old subject for a somewhat older bike and a an even older technology.

Did anybody ever receive an updated SERT map for this bike?  I purchased the SERT in January 2006 after getting my FLHTCUSE in December 2005 and it having the seemingly normal coughing/spitting issues of being too lean on the just off idle RPMs that we have all experienced with these bikes.  I customized the then stock "36" map (file 141MP002) to add some fuel in that low RPM/MAP range and the coughing/spitting has been gone since.

Since then I have added the better air cleaner and the Fullsac cores and assume I can squeeze a little more performance out of the machine at this point, or at least make her run a little better than the pretty much stock map that is in it now.

Yes, I still have an old, tiny, Windows XP powered laptop that runs the SERT software just fine.  In fact, just got through changing the idle slightly and decreasing the Decel Enleanment a bit to remove the deceleration pop that I started having after installing the Fullsac cores.

So I have the G disk, SERT version 4.5.3.  Does anyone have a later version of the above file, or the customized file that Harley was supposed to have released after all the complaints about the issues this bike had?  Or a customized file that works well in your bike that you would share?

On another note, anyone used the MyTune software from this site to tune their bikes?  http://www.tunemyharley.com/

Thanks for reading!
Logged
 

Page created in 0.227 seconds with 25 queries.