Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[n2cvo]

can anyone shed some light on where and how to connect Y-connector?  all connectors in tour pak are smaller? part number 68000113.  HD book says will work on 2015 FLTRSEU. Thanks to all

[OBB]

Tagging this to follow. I have one to put on mine also and haven't even looked at it yet.

[Zach Underwood]

The connector is between the tour pack and the seat under the back rest flap. Plug it in and then remove the rubber grommet from the tour pack and fish the pigtail in and replace the grommet.

[OBB]

The connector is between the tour pack and the seat under the back rest flap. Plug it in and then remove the rubber grommet from the tour pack and fish the pigtail in and replace the grommet.

very helpful first post Zach. 

And after getting off my lazy ass and looking, here's the instructions from MoCo's site.
http://www.harley-davidson.com/app-content/service/isheets/-J05847.PDF

[FLSTFI Dave]

 Looks pretty easy after reading the instructions.  Not sure if I will add a smoked one or not.  Have a RG Specail rear facia out for paint match now, and will add that and the tri bar light.   

With 3 wires does this light for the rack act as a break light also?

[OBB]

Looks pretty easy after reading the instructions.  Not sure if I will add a smoked one or not.  Have a RG Specail rear facia out for paint match now, and will add that and the tri bar light.   

With 3 wires does this light for the rack act as a break light also?

Yup, At least it did on my last one. Instructions say that it does.

Going for the tribar setup like I did on my '11 are ya? You got bags coming yet for yours? lol

[ptnlinda]

I was going to go with the Air Wing Rack light kit but have gone with the Tour Pak Spoiler and Smoked light kit which I hope to fit this week.

[n2cvo]

Thanks to all....installation complete once i found connector under rear flap thanks Zach.  Hardest thing was trying to feed wire
Thru rubber grommet  i decided to drill a new hole on the opposite side of tour pak.  Worked out perfect.   Running light not that bright but breaklight is brighter.

[flibb]

i thought the kit comes with another grommet to replace the one in the tour pack

[Boatman]

Running light not that bright but breaklight is brighter.

Happy you got it working.  Don't want to be a killjoy but the light (too me and I like a lot of lights) is worthless as you can only see at night.  Harley LED's are really weak compared to Custom Dynamics etc but they don't make this light that I am aware. 

I'm not saying this to be mean but may help someone else that is on the fence about this light (or lack of light)..   

[ultrafxr]

Happy you got it working.  Don't want to be a killjoy but the light (too me and I like a lot of lights) is worthless as you can only see at night.  Harley LED's are really weak compared to Custom Dynamics etc but they don't make this light that I am aware. 

I'm not saying this to be mean but may help someone else that is on the fence about this light (or lack of light)..

Agree. It is very weak in daylight.


Sent from my iPhone using Tapatalk

[FLSTFI Dave]

Yup, At least it did on my last one. Instructions say that it does.

Going for the tribar setup like I did on my '11 are ya? You got bags coming yet for yours? lol

YES, the rear Speical facia is out for paint now, I have all the parts includin the smoked tri bar light.   Going with the Older tri bar light as the new version requires wires going in and out of the light, the older style is just three in.

NO exteneded bags coming yet.  Have thought about it, but that is lots of money.  Most I will have the bike is three years.

[OBB]

YES, the rear Speical facia is out for paint now, I have all the parts includin the smoked tri bar light.   Going with the Older tri bar light as the new version requires wires going in and out of the light, the older style is just three in.

NO exteneded bags coming yet.  Have thought about it, but that is lots of money.  Most I will have the bike is three years.

May as well  a little more. I'm waiting on the fascia to get here, and the light. The newer style is what I put on the '11 and had to make a harness so to speak so it would plug into the tail light. The newer ones have the in and out ports. Wiring comes straight from under the seat with only two wires going into the tribar and the rest passing through going to the run/brake/turn on the customs. Took me a while to get it all working the way I wanted it to. Picked up an old style light from two cycle guys for just under $70 shipped. Fascia is coming from dealer. Once it gets here that, the mid frame deflectors, that damn black piece around the tp lights and a few other things are going to a local painter that did the fascia and saddlebag spoiler lights on my '11.


BOT. I still haven't installed my air wing light yet. Back has been killing me lately and don't feel like working on the bike with the pile of stuff I have to put on it.

[n2cvo]

 Hey boatman i totally agree the light is on the weak side. I only did because rack came installed.  The rubber grommet  that came with kit is the same size as original one.  I drilled a little smaller hole cut down grommet to accommidate size now have room to run additional wires later.

[OBB]

well hell. I bought the wrong damn kit for the newer bikes. I have HD 68721-08A. It doesn't have the correct y connector. MoCo's parts site is down right now. Will have to figure this out on Sat when I have the day off.