Topic: Gasket thickness (Read 6865 times)

Camojeeper · « **Reply #15 on:** January 02, 2015, 03:45:54 AM »

How much squish is enof? In 0.000" please

Ridgerunr · « **Reply #16 on:** January 02, 2015, 08:24:59 AM »

When going .030" and forged pistons, you won't be firing up a cold bike and instantly taking off with your pals hammer down. I don't do that with cast pistons but I see it a lot. I'd shoot for .035" and warm it up good.

Camojeeper · « **Reply #17 on:** January 03, 2015, 01:13:34 PM »

Everything I own has to get some heat in it before it's operated!
Ridgerunr only 0.035" that not to bad. Some of my race 2 strokes need 0.050"

Ridgerunr · « **Reply #18 on:** January 04, 2015, 08:15:23 AM »

"Ridgerunr only 0.035"

.035" is OK for a street bike. My last 3 builds were .030", but I warmed it and went easy until my oil temps came up.

Author Topic: Gasket thickness (Read 6865 times)

Camojeeper

Re: Gasket thickness

Ridgerunr

Re: Gasket thickness

Camojeeper

Re: Gasket thickness

Ridgerunr

Re: Gasket thickness