Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[hogasm]

Big B, Local dealer here is doing a special, 1550 kit installed with download for $1500 til Dec 15.
883 to a 1200 for $995 installed.

Hogasm

ps  ship the bike to east coast and back $1500

[Screamin_Beagle]

Cappy my ass, Spiderman's fishin for his 96"

[SPIDERMAN]

Beagle's tryin to set the dogs on me. Don't pay attention to him

[hogasm]

Cappy my ass, Spiderman's fishin for his 96"

Big B   You playin with us [smiley=nixweiss.gif]

[Talon]

I agree, the heads and cams would give you the best bang for the buck, the added displacement will usually only add a few more ponies. I reference the site below, because they have info any many questions asked in these forums!


http://www.nightrider.com/biketech/street_tc_engine.htm

[RedDevil]

OR...$950.00 for revperformance 98" bolt on cylinders/forged CP flat top pistons/rings/wristpins
        $265.00 for 37 chain cams
          $300.00 for Big Boyz street port and decking of heads for 9.7:1 comp.
            $65.00 for gasket kit (rev perf kit includes .030 cometic head and base gastets)
              $1575.00 total   .....will get you 100/100 with good pipe and tune

Good setup, but unless he's a good wrench, the labor will put him closer to $2K for all of that.
Cheers ,
Red

[hogasm]

Good setup, but unless he's a good wrench, the labor will put him closer to $2K for all of that.
Cheers ,
Red

Damn,  for 2 grand I'll fly out to Diago and install all that for him

oh yea and a few     that might make it too rich for Big B

[SPIDERMAN]

Big B   You playin with us [smiley=nixweiss.gif]

Sorry I never answered this, but yes I was using my poor neighbor Cappy as an excuse to try to sandbag Beags. I figured I'd get a hot 103 setup in LD and then run down Beagle and his Cherry Bomb with my " 96"  Kinda like a certain Road Glide ridin guy I met in MV who lives in West Virginia. 

B B