Topic: BCM error Code U0184?? (Read 9779 times)

Cat Eye · « **on:** March 14, 2015, 02:58:07 PM »

On my 2014 CVO Road King, I have a BCM error code U0184 which says in the manual as "Lost comm w/radio"....which I guess is true since there is not radio.

I keep clearing it but it keeps coming back.

Anyone got any ideas as to what going on

Or is there a radio on this thing that I don't know about?

Cat Eye · « **Reply #1 on:** March 31, 2015, 05:16:34 PM »

Ended up being a bad BCM unit.

Cat Eye · « **Reply #2 on:** April 07, 2015, 05:07:42 PM »

So they replaced the BCM and error code gone.....but the knucklehead did not configure the BCM correctly.
The tech did not know that the rear lights were a four wire setup until I showed him the wiring diagram.

Cat Eye · « **Reply #3 on:** April 22, 2015, 10:12:05 AM »

Had the BCM reprogramed and still is not right. No error code, but when I turn the switch to assessories....the rear lights come on.

tweeter13 · « **Reply #4 on:** April 22, 2015, 08:39:36 PM »

When programming or flashing the bcm they should have options to choose from. Radio yes/no cruise control yes/no ect.... This tells the bcm what options the bike has. If you tell it has a radio for example and when it waits for a signal from the radio and does not recive that signal it turns on the check engine light. Same way if it had a security system, abs it would need to see a signal from the abs control module or many other functions that the bike does.

I know this don't help you any but I hope it explains a little.

Todd.

Author Topic: BCM error Code U0184?? (Read 9779 times)

Cat Eye

BCM error Code U0184??

Cat Eye

Re: BCM error Code U0184??

Cat Eye

Re: BCM error Code U0184??

Cat Eye

Re: BCM error Code U0184??

tweeter13

Re: BCM error Code U0184??