www.CVOHARLEY.com

Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Tail light/Blinker Module  (Read 1430 times)

0 Members and 1 Guest are viewing this topic.

My103

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
  • FLHRSEI.ORG
Tail light/Blinker Module
« on: January 14, 2007, 04:01:15 PM »
Has anyone done the tail light/blinker module? If so, I installed it yesterday and after the installation the tail lights and the blinkers stay lit. Is this common or did I do something wrong?
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Tail light/Blinker Module
« Reply #1 on: January 14, 2007, 04:08:57 PM »
If you're saying they stay lit all the time and never change intensity from lower to higher for brake light functions or blink for signal indication then you've got a problem.  If they do change intensity and blink for signals as you'd expect that's how it's supposed to behave.
Logged

My103

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
  • FLHRSEI.ORG
Re: Tail light/Blinker Module
« Reply #2 on: January 14, 2007, 04:45:09 PM »
Thats how they work all three lite all the time - Brighter when brakes are applied and brighter when directional is on
Logged

Twolanerider

  • 25K CVO Member
  • *****
  • Offline Offline
  • Posts: 50549
  • EBCM #1.5 Emeritus DSP # ? Critter Gawker #?
    • MO


    • CVO1: 2000 Triple Red Screamin' Eagle Road Glide
    • CVO2: 2002 Candy Brandywine Screamin' Eagle Road King
    • CVO3: 1999 Arresting Red FXR2
Re: Tail light/Blinker Module
« Reply #3 on: January 14, 2007, 05:30:12 PM »
Quote
Thats how they work all three lite all the time - Brighter when brakes are applied and brighter when directional is on


Sounds like you're good to go  [smiley=xyxthumbs.gif] .
Logged

bikerdude

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
  • FLHRSEI.ORG
Re: Tail light/Blinker Module
« Reply #4 on: January 14, 2007, 06:53:06 PM »
Yes they stay on if your blinkers work you did a fine job.
Logged

My103

  • Newbie
  • *
  • Offline Offline
  • Posts: 49
  • FLHRSEI.ORG
Re: Tail light/Blinker Module
« Reply #5 on: January 14, 2007, 09:19:22 PM »
Thanks guys,
It was a little confusing because my buddy has an 06 UC and he was telling me his blinkers do not stay lit.
I said I know where I can go and find out, so again thanks
Logged

110tHunDer

  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 14319
Re: Tail light/Blinker Module
« Reply #6 on: January 14, 2007, 09:26:52 PM »
 
Mac, I posted photos here of my bike after the module install: http://flhrsei.org/cgi-bin/yabb/YaBB.cgi?num=1162508312/51#51

Yours is working fine. [smiley=xyxthumbs.gif]

Logged

Bagger

  • Guest
Re: Tail light/Blinker Module
« Reply #7 on: January 19, 2007, 01:03:35 PM »
I fiddled with this one for a good while as well, since this same module didn't act that way on my old Ultra.  Had Renea out there check the lights as I made them work.  Like everyone else said, you're good to go.
Logged

nixobilly

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 636
  • 07 'CUSE2 B & O ------ 09 BMW R1200GSA
    • TX
Re: Tail light/Blinker Module
« Reply #8 on: January 19, 2007, 02:17:09 PM »
Does anyone have the HD part number of this kit?

Thanks,
Mark
Logged

ROADROD

  • Junior CVO Member
  • **
  • Offline Offline
  • Posts: 77

    • CVO1: 2012 street glide
    • CVO2: 2006 v-rod yellow
    • CVO3: 2003 silver/black harley truck
Re: Tail light/Blinker Module
« Reply #9 on: January 19, 2007, 03:44:21 PM »
the kit i used was 69462-06..this is listed for a dyna but it worked perfect..this was on a 07 serk but should be the same...
Logged

Midnight Rider

  • AKA: TCnBham
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 11107
  • FLHRSEI.ORG

    • CVO1: 2011 SERGU Rio Red (sold)
Re: Tail light/Blinker Module
« Reply #10 on: January 19, 2007, 04:02:12 PM »
Some of you guys might want to take a look at these...it would allow you to keep the smoke lens covers, but still show red for stop and amber for turn...it's next on my list of things to do...

Just another option to consider.

http://www.customdynamics.com/motorcycle_dynamic_clusters.htm
Logged
Sometimes it takes a whole tankful of fuel before you can think straight.
I had the right to remain silent, just not the ability...

Gone, but not forgotten...2011 FLTRUSE with
Fullsac X Pipe w/2" Baffles
Legend Air Ride Rear Shocks
Traxxion Dynamics AK-20 Front Suspension
Clearview GT13 Windshield
TTS Mastertune

Hoist!

  • Monster
  • 10K CVO Member
  • ****
  • Offline Offline
  • Posts: 21634
  • This chit ain't ROCKET SCIENCE!!!!

    • CVO1: '07C FLHRSE3, BLACK ICE OF COURSE, CUSTOM 110" TC 6-SPEED +++, "CYBIL"!!!
    • CVO2: '99 FXR3 BRIGHT & DARK CANDY BLUE W/FLAMES, STAGE II 80" EVO 5-SPEED +++, "JOY"!!!
    • CVO3: 4: & 5: '85 FXWG BLACK w/CUSTOM FLAMES, 110" EVO 6-SPEED +++ CVO style!!!; '08 NSMC PROSG CUSTOM FXR BASED PRO STREET BLACK, 89" EVO 5-SPEED, VERY FAST!!!; '09 NSMC HSTBBR CUSTOM RIGID HOISTBOBBER, SILVER METALFLAKE BATES SOLO SEAT & TIN w/BLACK WISHBONE FRAME, 80" EVO (w/Shovelhead bottom end) 4-SPEED! VERY COOL!!!
Re: Tail light/Blinker Module
« Reply #11 on: January 19, 2007, 04:05:06 PM »
Quote
the kit i used was 69462-06..this is listed for a dyna but it worked perfect..this was on a 07 serk but should be the same...

I have 69462-06A. Don't know if the "A" matters, but that's the current Dyna P/N. ;) Hoist! 8-)
Logged
"We wanna be free to ride our machines without being hassled by The Man!"

Traxxion Dynamics Suspension Rules! "It ain't braggin' if you can back it up!"

"Cause I'm sitting on top of the world!" (zoom in on satellite map in my Profile)
 

Page created in 0.137 seconds with 25 queries.