Please login or register.

Login with username, password and session length
Advanced search  

Author Topic: Bike position in trailer  (Read 1761 times)

0 Members and 1 Guest are viewing this topic.

CVO Couple

  • Full CVO Member
  • ***
  • Offline Offline
  • Posts: 234
  • www.CVOHARLEY.com
    • SC


    • CVO1: 2015 FLHTKSE
    • CVO2: 2008 FXSTC Anniversary
Bike position in trailer
« on: August 04, 2015, 08:15:44 PM »

Got a 7x14 tandem trailer and setting it up to haul 2 bikes staggered side by side, when hauling 1 bike is it ok to put the single bike on a certain side of the trailer or create a middle position for single bike hauling? The single bike would be a little less than 1000lbs.
Logged

2015FLHTKSE

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
  • www.CVOHARLEY.com
    • NY


    • CVO1: 2015 FLHTKSE
Re: Bike position in trailer
« Reply #1 on: August 04, 2015, 08:30:39 PM »

I'm sure you will get a few different answers but I have never had a problem with putting a bike on either side. I usually put it furthest back so it is more over the axles, mainly for less tongue weight.
Logged

Craigisdad

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 780

    • CVO1: 2011 flstse2
Re: Bike position in trailer
« Reply #2 on: August 04, 2015, 08:58:30 PM »

I use a condor chock with etrack adapter, I have 2 strips of etrack front to back with 1 cross piece in the front and 1 in the middle. Gives you a lot of combinations to choose from. Good luck.
Logged
Craig

CVODON

  • 1K CVO Member
  • *
  • Offline Offline
  • Posts: 2421
    • FL

    • CVO1: 15 FLTRUSE
Re: Bike position in trailer
« Reply #3 on: August 04, 2015, 09:45:53 PM »

If you have Dexter or similar torison axles you can put the bikes wherever you want and the axle will compensate for the offset in weight. ie: Haul a 900# dresser on the left (or alone) with a 300# dirtbike beside it and the trailer will ride dead level due to axle flex.
If you have a leaf spring axle you might want to better balance the load as it has no way to compensate for different weights from side to side. But unless the trailer is really undersprung you should have no problems either way.
Logged

Jbbrown73

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 882
    • IL


    • CVO1: 2015 CVO RG Ultra
    • CVO2: 2002 FLHRSEI (Brandywine)
Re: Bike position in trailer
« Reply #4 on: August 05, 2015, 10:53:25 AM »

My trailer has leaf springs and I've never noticed any difference pulling a single bagger on one side or 2 baggers side by side.
Logged
Carterville, (Southern) Illinois (that would be 350 miles south of Chicago)

owl893

  • Elite CVO Member
  • *****
  • Offline Offline
  • Posts: 545

    • CVO1: 2011 FLHXSE2 Autumn Haze
Re: Bike position in trailer
« Reply #5 on: August 05, 2015, 12:41:55 PM »

What you CAN do and what is safest may be different.  Attempting to balance the weight is safest, both side to side and forward to back, with enough weight forward to load the tongue, but only so far that it doesn't float.  However, the other responses are correct, and you should have no problem on a fairly flat trip on good roads.  We have trailered through the mountains of North Carolina and Tennessee, and have seen a few (poorly loaded) trailer accidents. If you are going through elevation and switchbacks a balanced load will be the safest way.

OWL
Logged
1961 DUO GLIDE, 1979 FLH, 1999 FXDWG, 2001 FXSTS, 2003 FLHRCI, 2004 FLSTCI, 2005 FLHT, 2006 FLHXI, 2011 FLHXSE2

2k

  • My ignorance is just as good as your knowledge, when my information changes, I alter my conclusions
  • 5k CVO Member
  • ***
  • Offline Offline
  • Posts: 7996
  • monter le cheval de fer (French)
    • NC


    • CVO1: 2013 SERK-Dressed in BLUE of course.
    • CVO2: 2002 Supercharged HD F150 512 RWHP
    • CVO3: 1956 BelAir Sports Coupe
Re: Bike position in trailer
« Reply #6 on: August 05, 2015, 01:16:24 PM »

What Owl said & if you must load to one side I have always loaded on left. Someone told me why, but its been to long to remember.
Logged
Most Honda Goldwing riders will blink when hit in the head  with a ball-peen hammer (sans helmet)

PinkE

  • Senior CVO Member
  • ****
  • Offline Offline
  • Posts: 360
Re: Bike position in trailer
« Reply #7 on: August 05, 2015, 05:21:17 PM »

What Owl said & if you must load to one side I have always loaded on left. Someone told me why, but its been to long to remember.

It's the crown of the road and not letting your wagon lean with it but rather against it. This is especially true when you push the envelope with load and extreme crown or camber.
Logged
MY Broom is an `04 FLHTCUI Lehman Trike and I Love flyin on it!!!
 

Page created in 0.219 seconds with 21 queries.