Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Blksilverado]

Does anyone have any info on how to keep the Boom audio on whatever it was set to at shutdown?  I've noticed that mine seems to default to the ipod at start up, it takes it a little bit, but after it sees the ipod is connected it starts playing it instead.

I've attempted to read the book and search but cant find any info on this..

Thanks

[grc]

Check your system to see if you have the latest software update installed.  This is just one of a large number of "bugs" Harley has had with the new infotainment systems since they were introduced a couple years ago.  Try reading through this thread, or some of the earlier ones:  http://www.cvoharley.com/smf/index.php?topic=102143.0

Version 1.19.1 is the most recent update. 

http://www.harley-davidson.com/content/h-d/en_US/home/owners/infotainment/software-downloads.html

Jerry

[Blksilverado]

Thanks Jerry,  I have 1.19.0 from the factory...    will try a update to 1.19.1...

[windjammer]

Now that's funny mine goes to either fm or Sirius on startup and I would be thrilled if it went back to the iPod where it was shutdown on.

[RGlideKid]

Now that's funny mine goes to either fm or Sirius on startup and I would be thrilled if it went back to the iPod where it was shutdown on.

ME TOO!!!

[motor1]

Seems mine always jumps to weather band, (no, not a bad weather alert) just WB with static because it doesn't even land on a channel. I toggle back to Ipod, or XM and I am good again.

[Blksilverado]

Follow up - I did the update to 1.19.1 and have rode several times since, seems to be better.  Did have another issue where it didn't see my ipod at all a couple times, but for the most part it starts on FM now.

Does anyone have any info on how to keep the Boom audio on whatever it was set to at shutdown?  I've noticed that mine seems to default to the ipod at start up, it takes it a little bit, but after it sees the ipod is connected it starts playing it instead.

I've attempted to read the book and search but cant find any info on this..

Thanks

[chasfoy12]

I have same problem. Mine starts on WB with static. I like to blue tooth from my phone. Either Pandora or my Google music. Always have to go back to home screen select media. Then select my phone. Pain in the ass. Help

Sent from my SM-N920V using Tapatalk

[RGlideKid]

Yeah, now mine's on the weather band kick also.  Very annoying.
As far as not seeing the iPod, mine takes a few seconds after boot to see my SD card with all my MP3's on it, but then I have 20gb of songs for it to read.  The faster the card, the faster it will boot. 
I'm assuming the same applies for an iPod.  The more songs you have on it, the longer I think it will take to boot fresh each time.  I had an '11 RGU and sometimes the iPod took forever, even though it was only an 8gb version.  Then sometimes, I had to either unplug and plug it back in, or I had to boot the older system on the '11 again to get it to see the iPod.
Frustrating.  And by the way, I have the latest update on the Boom!Box.

[hdguy1]

Now that's funny mine goes to either fm or Sirius on startup and I would be thrilled if it went back to the iPod where it was shutdown on.

Mine always goes back to FM.

[CVODON]

Mine is always the same place on start-up that it was on shutdown. Has never been different.

[J Heinlein]

 The radio on my 15 CVOSG  defaults  back to the FM at each start up no mater what I had on at time of turning the bike off. It takes several minutes sometimes for it to spool up and recognize anything on the blue tooth mode. Cell phone or I-pod takes time to load for some reason. I love some of the updates that were done. It helped with all of the cutting out at high volume. I have had two done since Sept of 14.  The only down fall I have is that they turned the amp way down on power to keep everyone from complaining and service issues for them. Yes the radio is a high quality unit but at high speeds and pipes I still find myself asking for more. It was cut way back with the updates loaded in for sure.

[grc]

I think I asked this question in a similar thread some time back, but since no one answered I'll try again.  Is there a method to reset the unit to the factory settings?  In other words, to undo any and all "customization" the rider has done to user settings.  The reason I ask is that many issues have been traced in some of the threads to the settings people have changed.  If yours has the same update level as the next guy, and his starts up every time on whatever input he had operating at the time he shut it down while yours does not, there may be a difference in how the two of you have the user controlled settings adjusted.

Jerry

[Boatman]

Is there a method to reset the unit to the factory settings?  In other words, to undo any and all "customization" the rider has done to user settings.  The reason I ask is that many issues have been traced in some of the threads to the settings people have changed.
Jerry

Jerry, 14CVOUltra asked this question and there is a post where I told him how to go in the radio settings and default everything back to stock but can't find the post at this moment.   

[WTF Chuck]

To enter the service menu:

1) Turn ignition off and wait 15 seconds
2) Press and hold power/mute button.  Turn ignition to accessory.
3) Continue to press power button for 2 seconds after warning screen is displayed.
4) Release power/mute button and accept warning

The service menu will display the following options:

1)  DTCS
2)  Audio  a) EG (serves no purpose)  b) Speaker test(s)
3)  Display  (test the LCD display briteness and color consistency)
4)  Key input   (test the faceplate hard keys, handlebar switches, and passenger controls)
4)  Component menus (XM and Satellite Digital Audio Radio Service)
     a)  Module version-displays the XM versions
     b)  Subscription info
     c)  Signal status
     d)  XM antenna state (unsupported, detected, not detected, short, and unknown)
     e)  Tone generation  (allows for generating left or right audio tone generated by the xm
          module)
     f)   Navigation setting (no diagnostic value)
     g)  GPS status (displays a graphical representation of GPS satellite position&signal strength)
     H)  Tuner-displays the current frequency, signal strength, RDS/RBDS info for each tuner.   
          If the signal is unavailabe or out of range, the display may show dashes instead of a   
          value.
     I)   Compass indicates current direction
5)  Version information (sub menus show navigation and database versions but offer no diagnostic
     help.
6)  Reset
     a)  Precalibration reset-restores factory settings-recommended when there are no problems or
          DTCS..
     b)  Post calibration save-Archives customer settings after post calibration reset
     c)  Post calibration reset-Resets radio default settings and restores customer data stored in
          post calibration save
     d)  Privacy reset-clears private data (phone pairing, phone #'s, presets, navi history)
7)  Touchscreen Calibration 6.5 only
     Calibrate the touchscreen by pressing the center of the displayed target.  The target moves
     to a new location on the screen after each press for a total of 3 presses.  Press accept
     for the calibration to update.